how do I reset the oil change light on my GMC Sierra T1XX (2019-Present)

GMC Sierra T1XX (2019-Present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

388 words

Problem Statement

Learn how to reset the oil change light on your GMC Sierra T1XX (2019-Present) with this step-by-step guide. Ensure your vehicle is properly maintained.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely parked to prevent rolling.

Symptoms

•Oil change light illuminated on the dashboard
•Possible message indicating 'Oil Change Due'
•Engine oil level and quality may be acceptable, but alert remains

Diagnostic Steps

1
Ensure the vehicle is in the 'On' or 'Run' position without starting the engine.
2
Locate the 'Gas' or 'Menu' button on the driver information center (DIC).
3
Use the directional arrows to navigate to the 'Oil Life' or 'Oil Change' menu.
4
Select the 'Reset' option to initiate the oil change light reset process.
5
Confirm the reset when prompted by pressing the 'OK' button.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specific, but a user manual may be helpful for reference.

Parts Required

•None required for the reset procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'On' or 'Run' position without starting the engine.
2
Locate the 'Gas' or 'Menu' button on the driver information center (DIC).
3
Use the directional arrows to navigate to the 'Oil Life' or 'Oil Change' menu.
4
Select the 'Reset' option to initiate the oil change light reset process.
5
Confirm the reset when prompted by pressing the 'OK' button.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Verify that the ignition is in the "On" position without starting the engine.

2. Access the Driver Information Center (DIC)

Locate the "Gas" or "Menu" button on the steering wheel or dashboard.
Press the button to bring up the DIC menu.

Use the directional arrows on the steering wheel to scroll through the menu.
Find the "Oil Life" or "Oil Change" option displayed on the screen.

4. Reset the Oil Change Light

Once on the "Oil Life" menu, press and hold the "OK" button until you see the message indicating that the oil life has been reset. This may take a few seconds.
Release the button once the reset message appears.

5. Verify Reset

Turn off the ignition and then restart the vehicle.
Confirm that the oil change light is no longer illuminated.