how to check the transmission fluid level in GMC Sierra T1XX (2019-Present)?

Learn how to check the transmission fluid level in GMC Sierra T1XX (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and safety warnings.

Solution

1. Preparation

• Gather necessary tools: a lint-free cloth and a funnel if adding fluid.
• Ensure the vehicle is on a level surface and the engine is warmed up.

2. Locate and Remove Dipstick

• Open the hood and locate the transmission dipstick (usually near the back of the engine).
• Pull the dipstick out gently, avoiding any spills.

3. Check Fluid Level

• Wipe the dipstick clean with a lint-free cloth.
• Insert the dipstick back into the tube completely, then remove it again to check the fluid level.
• The fluid should be within the "Full" and "Add" marks on the dipstick.

4. Add Fluid (if necessary)

• If the fluid level is low, place a funnel into the dipstick tube.
• Add the recommended transmission fluid (consult the owner’s manual for specifications).
• Add fluid gradually, checking the level frequently to avoid overfilling.

5. Reinsert Dipstick

• Once the fluid level is correct, reinsert the dipstick fully back into the tube.
• Ensure the dipstick is secured properly.

Tools Required:

• Lint-free cloth
• Funnel (if adding fluid)

Parts Required:

• GM-approved transmission fluid (consult the owner’s manual for specific type)

Estimated Repair Time: 15-30 minutes

Safety Warnings:

• Ensure the engine is running during the fluid level check to get an accurate reading.
• Be careful of hot engine components and fluids.