how to fix a GMC Sierra T1XX (2019-Present) that shakes while driving?

GMC Sierra T1XX (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

487 words

Problem Statement

Learn how to diagnose and fix shaking issues in GMC Sierra T1XX. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely supported before working underneath it.
•Wear appropriate safety gear, including gloves and eye protection.

Symptoms

•Steering wheel vibration at certain speeds
•Shaking felt through the seat or floor
•Uneven tire wear
•Noise coming from the suspension or wheel area
•Difficulty steering or maintaining control

Diagnostic Steps

1
Inspect the tires for proper inflation and alignment.
2
Check for visible damage or wear on the tires and rims.
3
Perform a wheel balance check.
4
Inspect the suspension components for wear or damage.
5
Examine the drivetrain for any loose or damaged parts.
6
Scan for any error codes related to the stability control system.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Socket set
•Wheel balancer
•Torque wrench

Parts Required

•Replacement tires (if damaged)
•Wheel weights (if balancing is needed)
•Suspension components (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the tires for proper inflation and alignment.
2
Check for visible damage or wear on the tires and rims.
3
Perform a wheel balance check.
4
Inspect the suspension components for wear or damage.
5
Examine the drivetrain for any loose or damaged parts.
6
Scan for any error codes related to the stability control system.

Solution

1. Preparation

Gather tools and parts.
Ensure the vehicle is on a level surface and securely supported with jack stands.
Disconnect the battery to avoid accidental activation of electrical components.

2. Tire Inspection and Maintenance

Check Tire Pressure
- Use a tire pressure gauge to measure each tire's pressure.
- Inflate or deflate as necessary to meet manufacturer specifications.
Inspect for Damage
- Examine tires for bulges, cracks, or foreign objects.
- Replace any damaged tires.

3. Wheel Balancing

Remove Wheels
- Loosen lug nuts and remove the wheels using a socket set.
Balance Wheels
- Use a wheel balancer to check and adjust the balance of each wheel.
- Add wheel weights as needed to achieve balance.

4. Suspension Inspection

Visual Inspection
- Examine suspension components, including shocks, struts, and control arms, for signs of wear or damage.
Test for Play
- Grasp the wheel at 12 and 6 o'clock, and check for excessive movement indicating worn components.
- Replace any worn or damaged suspension parts.

5. Drivetrain Inspection

Check for Loose Components
- Inspect the driveshaft, CV joints, and axle assemblies for any signs of looseness or damage.
Tighten Bolts
- Ensure all bolts and fasteners are torqued to manufacturer specifications.