how to fix GMC Sierra T1XX (2019-Present) transmission jerking when shifting?

GMC Sierra T1XX (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

587 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission jerking in GMC Sierra T1XX (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine and transmission to cool before opening components.

Symptoms

•Jerking or jolting sensation during gear shifts
•Delayed or harsh shifting between gears
•Unusual noises, such as clunking, during shifting
•Possible 'Check Engine' light illuminated
•Fluid leaks under the vehicle
•Reduced acceleration or power delivery

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related trouble codes.
2
Inspect transmission fluid level and condition; check for signs of contamination or burning.
3
Examine transmission mounts for wear or damage that could affect shifting.
4
Test the throttle position sensor (TPS) and transmission control module (TCM) for proper function.
5
Check electrical connections and wiring related to the transmission for corrosion or damage.
6
Perform a road test to evaluate the severity of the jerking and identify specific shifting patterns.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Transmission fluid pump
•Socket set
•Drain pan
•Funnel
•Jack and jack stands

Parts Required

•Transmission fluid (as per manufacturer specifications)
•Transmission filter (if applicable)
•Transmission mounts (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related trouble codes.
2
Inspect transmission fluid level and condition; check for signs of contamination or burning.
3
Examine transmission mounts for wear or damage that could affect shifting.
4
Test the throttle position sensor (TPS) and transmission control module (TCM) for proper function.
5
Check electrical connections and wiring related to the transmission for corrosion or damage.
6
Perform a road test to evaluate the severity of the jerking and identify specific shifting patterns.

Solution

1. Preparation

Gather tools and parts required for the repair.
Disconnect the negative battery terminal to prevent any electrical shorts.
Allow the engine and transmission to cool before starting work.

2. Check and Replace Transmission Fluid

Tools Required: Transmission fluid pump, socket set, drain pan, funnel.
Place a drain pan under the transmission pan and remove the drain plug or pan bolts.
Allow old fluid to drain completely.
Inspect the transmission filter; replace if clogged or dirty.
Reinstall the drain plug and fill the transmission with the manufacturer-recommended fluid using a funnel.
Verify fluid level using the dipstick and add more fluid if necessary.

3. Inspect and Replace Transmission Mounts

Tools Required: Jack and jack stands, socket set.
Raise the vehicle securely on jack stands.
Locate and inspect the transmission mounts for signs of wear or damage.
If necessary, remove the bolts securing the old transmission mounts and replace them with new ones.
Tighten the new mounts to the manufacturer-specified torque settings.

4. Reprogram or Update Transmission Control Module

Tools Required: OBD-II scanner capable of programming.
Connect the OBD-II scanner to the vehicle’s diagnostic port.
Follow the scanner's instructions to access the TCM settings.
Check for any available updates and perform a reprogramming if required.

5. Reconnect Battery and Test

Reconnect the negative battery terminal.
Start the engine and allow it to reach operating temperature.
Perform a road test to confirm that the transmission jerking has been resolved.