how to fix the rearview camera malfunction in GMC Sierra T1XX (2019-Present)?

GMC Sierra T1XX (2019-Present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

513 words

Problem Statement

Learn how to diagnose and fix rearview camera malfunction in GMC Sierra T1XX (2019-Present). Step-by-step guide with symptoms, diagnostics, and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components to prevent shorts and ensure safety.

Symptoms

•Rearview camera display is blank or not functioning
•Error message displayed on the infotainment screen
•Camera feed shows distorted or blurry images
•Camera activates intermittently
•Backup assist features are not functioning properly

Diagnostic Steps

1
Check for any error codes using an OBD-II scanner to identify potential issues with the camera system.
2
Inspect the camera lens for dirt, debris, or damage that could impair visibility.
3
Verify the wiring connections at the rear camera for corrosion, damage, or loose connections.
4
Check the fuse related to the camera system in the fuse box to ensure it is not blown.
5
Test the display screen in the infotainment system for functionality and proper connection.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Microfiber cloth
•Screwdriver set
•Electrical tape
•Trim removal tool

Parts Required

•Replacement rearview camera (if necessary)
•Wiring connectors (if repairs are needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check for any error codes using an OBD-II scanner to identify potential issues with the camera system.
2
Inspect the camera lens for dirt, debris, or damage that could impair visibility.
3
Verify the wiring connections at the rear camera for corrosion, damage, or loose connections.
4
Check the fuse related to the camera system in the fuse box to ensure it is not blown.
5
Test the display screen in the infotainment system for functionality and proper connection.

Solution

1. Preparation

Gather tools and parts needed for the repair.
Disconnect the vehicle battery to ensure safety while working on the electrical system.

2. Inspect and Clean the Camera

Remove any dirt or debris from the camera lens using a microfiber cloth and a gentle cleaning solution.
If the lens is scratched or damaged, consider replacing the camera.

3. Check and Repair Wiring

Access the rear camera wiring harness by removing the necessary trim panels.
Inspect the wiring for any signs of fraying, corrosion, or damage.
- If damaged, repair the wiring using electrical tape or replace sections as necessary.
Ensure all connectors are securely attached and free of corrosion.

4. Replace the Camera (if necessary)

If the camera is determined to be faulty:
- Disconnect the wiring harness from the old camera.
- Remove the mounting screws securing the camera.
- Install the new camera by reversing the removal steps.
- Reconnect the wiring harness securely.

5. Test the System

Reconnect the vehicle battery.
Start the vehicle and engage the reverse gear to check if the rearview camera is functioning correctly.
Verify that the camera feed is clear and displays properly on the infotainment screen.