how to reset check engine light on GMC Sierra T1XX (2019-Present)

GMC Sierra T1XX (2019-Present)

Error Codes

30 minutes to 1 hour

Time

medium

Difficulty

medium

Severity

3 min read

421 words

Problem Statement

Learn how to reset the check engine light on your GMC Sierra T1XX (2019-Present) with this step-by-step guide. Ensure your vehicle runs smoothly.

Affected Component

Electrical

Estimated Time

30 minutes to 1 hour

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to avoid short circuits

Symptoms

•Check engine light illuminated on the dashboard
•Possible previous engine performance issues
•No other warning lights illuminated
•Vehicle operates normally without noticeable symptoms

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any underlying issues
2
Address any identified issues before attempting to reset the light
3
Ensure the gas cap is securely tightened, as a loose cap can trigger the CEL
4
Disconnect the battery to reset the vehicle's computer (if necessary)
5
Use the OBD-II scanner to clear the error codes

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Safety gloves
•Safety glasses
•Socket wrench

Parts Required

•None required for resetting the light, but repairs may be necessary if codes indicate faults.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any underlying issues
2
Address any identified issues before attempting to reset the light
3
Ensure the gas cap is securely tightened, as a loose cap can trigger the CEL
4
Disconnect the battery to reset the vehicle's computer (if necessary)
5
Use the OBD-II scanner to clear the error codes

Solution

1. Preparation

Gather the necessary tools: OBD-II scanner, safety gloves, and safety glasses.
Ensure the vehicle is parked on a flat surface and the engine is off.

2. Scan for Error Codes

Connect the OBD-II scanner to the vehicle’s OBD-II port, typically located under the dashboard near the driver’s seat.
Turn the ignition to the "ON" position without starting the engine.
Follow the scanner's prompts to read error codes and document any codes displayed.

3. Clear Error Codes

After documenting, navigate to the option on the scanner to "Clear Codes" or "Erase Codes".
Confirm the action on the scanner and wait for the confirmation message indicating the codes have been cleared.

4. Disconnect Battery (if applicable)

If the CEL remains illuminated after clearing codes, disconnect the negative terminal of the battery using a socket wrench.
Leave disconnected for 10-15 minutes to reset the vehicle’s computer.
Reconnect the negative terminal and tighten it securely.