how to reset the check engine light on GMC Sierra T1XX (2019-Present)

GMC Sierra T1XX (2019-Present)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

424 words

Problem Statement

Learn how to reset the check engine light on GMC Sierra T1XX (2019-Present). Step-by-step guide with diagnostic steps and tools required.

Affected Component

Engine

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park with the engine off when connecting the OBD-II scanner.

Symptoms

•Check engine light illuminated on the dashboard
•Possible diagnostic trouble codes (DTCs) stored in the vehicle's computer
•Engine performance may be affected depending on the issue triggering the CEL
•Rough idle
•Reduced power
•Potential emissions warnings if related to emissions components

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify the issue triggering the check engine light.
2
Inspect any recent maintenance or repairs to determine if something may have caused the light to illuminate.
3
Clear the error codes using the OBD-II scanner to reset the check engine light.
4
Monitor the vehicle for any reoccurrence of the check engine light after clearing the codes.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Vehicle owner's manual

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Symptoms

•Check engine light illuminated on the dashboard

•Possible diagnostic trouble codes (DTCs) stored in the vehicle's computer

•Engine performance may be affected depending on the issue triggering the CEL

•Rough idle

•Reduced power

•Potential emissions warnings if related to emissions components

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify the issue triggering the check engine light.
2
Inspect any recent maintenance or repairs to determine if something may have caused the light to illuminate.
3
Clear the error codes using the OBD-II scanner to reset the check engine light.
4
Monitor the vehicle for any reoccurrence of the check engine light after clearing the codes.

Solution

1. Preparation

Gather necessary tools: OBD-II scanner, vehicle owner's manual.
Ensure the vehicle is parked on a level surface and the engine is off.

2. Scan for Error Codes

Connect the OBD-II scanner to the vehicle's OBD-II port, typically located under the dashboard near the driver's seat.
Turn the ignition to the "ON" position without starting the engine.
Follow the scanner instructions to retrieve and document any stored error codes.

3. Clear Error Codes

On the OBD-II scanner, select the option to clear or erase the codes.
Confirm the action and wait for the scanner to indicate that the codes have been successfully cleared.

4. Verify the Reset

Turn off the ignition and disconnect the OBD-II scanner.
Start the engine and observe the dashboard for the check engine light.
If the light remains off, the reset was successful.