my GMC Sierra T1XX (2019-Present) key fob not working how to reprogram

GMC Sierra T1XX (2019-Present)

Error Codes

30 minutes to 1 hour

Time

medium

Difficulty

medium

Severity

3 min read

505 words

Problem Statement

Learn how to reprogram the key fob for your GMC Sierra T1XX (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and tools required.

Affected Component

Electrical

Estimated Time

30 minutes to 1 hour

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and on a level surface while working on the key fob.

Symptoms

•Key fob buttons are unresponsive
•Remote start feature not functioning
•Door locks do not respond to key fob
•Indicator lights on the key fob not illuminating
•Vehicle does not recognize the key fob when attempting to unlock or start

Diagnostic Steps

1
Check the battery of the key fob for charge and replace if necessary.
2
Test the key fob's signal using a multimeter to determine if it's transmitting properly.
3
Inspect the key fob for any physical damage or wear.
4
Verify that the vehicle’s battery is charged and functioning correctly.
5
Attempt to unlock the vehicle using the physical key blade to rule out vehicle lock issues.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Flathead screwdriver
•Multimeter

Parts Required

•Key fob battery (CR2032)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the battery of the key fob for charge and replace if necessary.
2
Test the key fob's signal using a multimeter to determine if it's transmitting properly.
3
Inspect the key fob for any physical damage or wear.
4
Verify that the vehicle’s battery is charged and functioning correctly.
5
Attempt to unlock the vehicle using the physical key blade to rule out vehicle lock issues.

Solution

1. Preparation

Gather necessary tools: OBD-II scanner (if needed), new battery (if replacing), and a flathead screwdriver.
Ensure the vehicle is in a secure location and the engine is off.

2. Replace Key Fob Battery (if necessary)

Sub-step 1: Use a flathead screwdriver to gently pry open the key fob casing.
Sub-step 2: Remove the old battery and dispose of it properly.
Sub-step 3: Insert a new battery (typically CR2032) ensuring the positive side is facing up.
Sub-step 4: Snap the key fob casing back together securely.

3. Reprogram Key Fob

Sub-step 1: Sit in the driver’s seat with all doors closed.
Sub-step 2: Insert the key into the ignition and turn it to the “ON” position without starting the engine.
Sub-step 3: Press the lock button on the key fob within 5 seconds, then turn the ignition to “OFF” and remove the key.
Sub-step 4: Repeat the process two more times for a total of three cycles (ON-OFF with lock button pressed).
Sub-step 5: On the final cycle, after turning the ignition to “OFF”, press the lock button on the key fob again. The locks should cycle to indicate successful programming.

4. Test Key Fob Functionality

Sub-step 1: Exit the vehicle and test all key fob buttons (lock/unlock, remote start, panic).
Sub-step 2: Ensure the vehicle responds accordingly to each command.