what does the C0035 code indicate for my GMC Sierra T1XX (2019-Present) and how to fix it?

GMC Sierra T1XX (2019-Present)

Error Codes

1-3 hours

Time

medium

Difficulty

high

Severity

Error Code: C0035

3 min read

541 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix C0035 code related to the left front wheel speed sensor in GMC Sierra T1XX. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code

C0035

Affected Component

Brakes

Estimated Time

1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the vehicle to cool down before working on brake components.

Symptoms

•ABS warning light illuminated on the dashboard
•Traction control warning light illuminated
•Unresponsive ABS system during braking
•Increased stopping distance
•Erratic speedometer readings

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to confirm the C0035 code and check for any related codes.
2
Inspect the wiring and connectors of the left front wheel speed sensor for damage or corrosion.
3
Measure the resistance of the left front wheel speed sensor using a multimeter, comparing it to the manufacturer's specifications.
4
Check the wheel speed sensor signal using a scan tool while turning the wheel to ensure it is producing a proper signal.
5
Inspect the reluctor ring (tone ring) for any cracks or missing teeth.
6
Verify that there are no issues with the ABS module by checking for proper operation and any stored fault codes.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Torque wrench
•Wire connectors
•Electrical cleaner

Parts Required

•Left front wheel speed sensor
•Wire connectors (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to confirm the C0035 code and check for any related codes.
2
Inspect the wiring and connectors of the left front wheel speed sensor for damage or corrosion.
3
Measure the resistance of the left front wheel speed sensor using a multimeter, comparing it to the manufacturer's specifications.
4
Check the wheel speed sensor signal using a scan tool while turning the wheel to ensure it is producing a proper signal.
5
Inspect the reluctor ring (tone ring) for any cracks or missing teeth.
6
Verify that there are no issues with the ABS module by checking for proper operation and any stored fault codes.

Solution

1. Preparation

Gather tools and safety equipment.
Disconnect the battery to prevent electrical shorts.
Tools Required: OBD-II scanner, multimeter, socket set, torque wrench, wire connectors, and electrical cleaner.

2. Inspect and Repair Wiring

Sub-step 1: Visually inspect the wiring harness leading to the left front wheel speed sensor for frays or damage.
Sub-step 2: Repair any damaged wires using appropriate wire connectors and electrical tape.
Sub-step 3: Clean the sensor connectors with electrical cleaner to ensure good contact.

3. Replace Left Front Wheel Speed Sensor

Sub-step 1: Remove the wheel and tire assembly to access the sensor.
Sub-step 2: Locate the left front wheel speed sensor and remove the mounting bolts using a socket.
Sub-step 3: Disconnect the wiring harness from the sensor.
Sub-step 4: Install the new wheel speed sensor by reversing the removal steps.
Sub-step 5: Torque the mounting bolts to the manufacturer’s specifications (usually around 10-15 ft-lbs).

4. Reconnect Battery and Test

Sub-step 1: Reconnect the battery terminals, ensuring they are tight.
Sub-step 2: Start the vehicle and perform a test drive to verify that the ABS and traction control warning lights are off.