FAULTBASE
NEWSASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Honda/Accord/10th Generation (2018-2022)/how to fix P0011 code on Honda Accord 9th Generation (2013-2017)

how to fix P0011 code on Honda Accord 9th Generation (2013-2017)

Honda Accord 10th Generation (2018-2022)

Severity: highDifficulty: mediumError Code: P00112-4 hours
3 min read
593 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0011 VVT issue in Honda Accord 9th Generation (2013-2017). Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0011
Component
Engine
Repair Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical components.
  • ⚠Allow engine to cool before draining oil.
  • ⚠Ensure the engine is completely off and cool before starting work.

Symptoms

  • •Check engine light illuminated
  • •Engine may run rough at idle
  • •Decreased fuel efficiency
  • •Loss of power during acceleration
  • •Engine stalling or misfiring
  • •Unusual engine noise (ticking or rattling)

Diagnostic Steps

  1. 1Scan the vehicle's computer system using an OBD-II scanner to confirm the P0011 code and check for any additional codes.
  2. 2Inspect the engine oil level and condition; ensure that it is within the recommended range and not dirty or contaminated.
  3. 3Verify the operation of the VVT solenoid by checking for electrical issues (using a multimeter to test voltage and resistance).
  4. 4Check the timing chain/belt alignment to ensure it has not slipped or stretched.
  5. 5Inspect the VVT actuator for any blockages or damage.
  6. 6Clear the codes and take the vehicle for a test drive to see if the code reappears.

Solution

Solution

1. Preparation

  • Gather necessary tools and parts.
  • Disconnect the battery to prevent electrical shorts.
  • Ensure the vehicle is on a flat surface and engage the parking brake.

2. Change Engine Oil and Filter

  • Sub-steps:
    1. Drain the old engine oil using a socket set to remove the oil drain plug.
    2. Replace the oil filter with a new one.
    3. Refill the engine with new oil of the recommended type (5W-20 for Honda).
  • Tools Required: Socket set, oil filter wrench, oil catch pan.
  • Safety Warnings: Allow engine to cool before draining oil.

3. Inspect and Replace VVT Solenoid

  • Sub-steps:
    1. Locate the VVT solenoid on the engine (usually near the camshaft).
    2. Disconnect the electrical connector and unbolt the solenoid using a socket set.
    3. Clean the mounting area and install the new solenoid, ensuring it is seated properly.
    4. Reconnect the electrical connector.
  • Tools Required: Socket set, torque wrench.
  • Safety Warnings: Disconnect the battery before working on electrical components.

4. Check Timing Chain/Belt

  • Sub-steps:
    1. Remove the timing cover using a socket set.
    2. Check the alignment marks on the timing chain/belt; if misaligned, realign or replace as necessary.
    3. Reinstall the timing cover and torque it to manufacturer specifications.
  • Tools Required: Socket set, torque wrench.
  • Safety Warnings: Ensure the engine is completely off and cool before starting work.

5. Clear Codes and Test Drive

  • Sub-steps:
    1. Use the OBD-II scanner to clear the P0011 code.
    2. Take the vehicle for a test drive to ensure the issue is resolved and that the code does not reappear.
  • Tools Required: OBD-II scanner.

Verification

After completing the repair, verify that the issue has been resolved:

  • Test the affected component to ensure it functions correctly
  • Check for any error codes or warning lights
  • Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • OBD-II scanner
  • Socket set
  • Torque wrench
  • Oil filter wrench
  • Oil catch pan
  • Multimeter

Parts Required

  • VVT solenoid
  • Engine oil (5W-20)
  • Oil filter

Additional Information

Error CodeP0011
Component

Engine

Repair Time

2-4 hours

Difficulty

medium

Severity

high

Tools

6 items

Parts

3 items

Related Faults

Discover similar issues

  1. my Honda Accord battery dies overnight what could be causing it

    Learn how to diagnose and fix the issue of your Honda Accord battery dying overnight. Step-by-step guide with symptoms, diagnostic steps, and repair i...

    Component:Electrical
    Symptoms
    • •Battery warning light illuminated on the dashboard
    • •Difficulty starting the engine
    • +{count} more
  2. my Honda Accord displays a dashboard warning light what does it mean

    Learn how to diagnose and fix dashboard warning lights on Honda Accord. Step-by-step guide with diagnostic procedures and repair instructions.

    Component:Electrical
    Symptoms
    • •Check engine light illuminated
    • •Oil pressure warning light on
    • +{count} more
  3. how to fix my Honda Accord that won't start but clicks

    Learn how to diagnose and fix starting issues in Honda Accord. Step-by-step guide with symptoms, diagnostic steps, tools, and repair instructions.

    Component:Electrical
    Symptoms
    • •Clicking noise when the ignition key is turned
    • •Dashboard lights dim or flicker
    • +{count} more
  4. my Honda Accord lights flicker when I turn on the AC what's wrong

    Learn how to diagnose and fix flickering lights when AC is on in Honda Accord. Step-by-step guide with diagnostic procedures and repair instructions.

    Component:Electrical
    Symptoms
    • •Flickering dashboard lights
    • •Dim headlights when AC is activated
    • +{count} more
  5. my Honda Accord transmission hesitates when shifting into gear what’s the issue

    Learn how to diagnose and fix transmission hesitation in Honda Accord. Step-by-step guide with diagnostic procedures and repair instructions.

    Component:Transmission
    Symptoms
    • •Hesitation during gear shifts
    • •Slipping transmission
    • +{count} more
  6. how to fix sticky throttle on Honda Accord 9th Generation (2013-2017)

    Learn how to diagnose and fix a sticky throttle in Honda Accord 9th Generation (2013-2017). Step-by-step guide with symptoms, diagnostic steps, and re...

    Component:Engine
    Symptoms
    • •Throttle is unresponsive or slow to respond
    • •Engine revs unexpectedly when accelerating
    • +{count} more

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation