how to replace brake pads on Honda Accord 8th Generation (2008-2012)?

Solution

1. Preparation

• Gather all necessary tools and parts.
• Park the vehicle on a flat surface and engage the parking brake.
• Gather tools: jack, jack stands, lug wrench, socket set, brake cleaner, C-clamp or brake caliper tool, and torque wrench.

2. Lift the Vehicle

• Loosen lug nuts slightly while the car is on the ground.
• Use a jack to lift the vehicle and secure it with jack stands.
• Remove the lug nuts completely and take off the wheel.

3. Remove the Caliper

• Locate the caliper mounting bolts and remove them using a socket wrench.
• Carefully slide the caliper off the brake rotor.
• Support the caliper using a bungee cord or wire to avoid stressing the brake line.

4. Replace the Brake Pads

• Remove the old brake pads from the caliper bracket.
• Compare the new pads with old ones for proper fit.
• Apply brake grease to the back of the new pads to prevent squeaking.
• Insert the new pads into the caliper bracket.

5. Compress the Caliper Piston

• Use a C-clamp or brake caliper tool to compress the caliper piston back into the caliper housing.
• Ensure the piston is flush with the housing to allow for the new pads' thickness.

6. Reinstall the Caliper

• Slide the caliper back over the new brake pads and rotor.
• Reinstall and torque the caliper mounting bolts to the manufacturer's specifications (usually around 20-25 ft-lbs).

7. Reassemble the Wheel

• Place the wheel back onto the hub and hand-tighten the lug nuts.
• Lower the vehicle off the jack stands and tighten the lug nuts to the specified torque (typically 80-100 ft-lbs).

8. Final Check

• Pump the brake pedal a few times to ensure proper caliper engagement and restore brake pressure.
• Check for any leaks or abnormalities around the brake system.