how to replace the headlight bulb on Honda Accord 9th Generation (2013-2017)

Honda Accord 10th Generation (2018-2022)

Error Codes

30 minutes to 1 hour

Time

medium

Difficulty

medium

Severity

3 min read

459 words

Problem Statement

Step-by-step guide to replace the headlight bulb on a 2013-2017 Honda Accord. Includes symptoms, diagnostic steps, tools, and safety warnings.

Affected Component

Electrical

Estimated Time

30 minutes to 1 hour

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to avoid shocks or shorts.

Symptoms

•Dim or non-functional headlight
•Flickering headlight
•Warning indicator on the dashboard (if applicable)

Diagnostic Steps

1
Inspect the headlight to confirm that the bulb is burnt out by visually checking for any broken filaments.
2
Test the headlight circuit using a multimeter to ensure the socket is receiving power.
3
Check for any blown fuses related to the headlight system in the fuse box.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Multimeter
•Gloves or clean cloth

Parts Required

•Replacement headlight bulb (H11 or H9 depending on the function)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather all necessary tools and parts.
Ensure the vehicle is parked on a level surface and the engine is off.
Disconnect the negative battery terminal to prevent any electrical shorts.

2. Access the Headlight Assembly

Open the hood of the vehicle.
Locate the headlight assembly at the front of the engine compartment.
If necessary, remove any components obstructing access to the headlight bulb, such as the air intake duct or battery, depending on the side being worked on.

3. Remove the Old Bulb

Locate the bulb socket at the rear of the headlight assembly.
Twist the bulb socket counterclockwise to remove it from the assembly.
Carefully pull the old bulb straight out of the socket, avoiding any pressure on the glass part.

4. Install the New Bulb

Take the new bulb (ensure it is the correct type: H11 for low beam or H9 for high beam) and avoid touching the glass with your fingers; use gloves or a clean cloth.
Insert the new bulb into the socket until it clicks into place.
Reinsert the bulb socket into the headlight assembly and twist it clockwise to secure it.

5. Reassemble Components

If any components were removed, reinstall them in the reverse order of removal.
Reconnect the negative battery terminal.

6. Test the New Bulb

Start the vehicle and turn on the headlights to ensure the new bulb is functioning properly.