how to reset the maintenance light in Honda Accord 8th Generation (2008-2012)

Honda Accord 10th Generation (2018-2022)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

400 words

Problem Statement

Learn how to reset the maintenance light on your 2008-2012 Honda Accord. Step-by-step guide to ensure your vehicle's maintenance light is off.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe, stable position before performing the reset.

Symptoms

•Maintenance light is illuminated on the dashboard
•Vehicle owner cannot determine when the next service is due
•Recent maintenance performed but light remains on

Diagnostic Steps

1
Turn the ignition key to the 'ON' position without starting the engine.
2
Ensure the odometer is displayed on the dashboard (not the trip meter).
3
Turn off the ignition key.
4
Press and hold the 'Trip' or 'Reset' button on the dashboard.
5
While holding the button, turn the ignition key back to the 'ON' position.
6
Continue to hold the button until the maintenance light begins to blink and then turns off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ignition key

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition key to the 'ON' position without starting the engine.
2
Ensure the odometer is displayed on the dashboard (not the trip meter).
3
Turn off the ignition key.
4
Press and hold the 'Trip' or 'Reset' button on the dashboard.
5
While holding the button, turn the ignition key back to the 'ON' position.
6
Continue to hold the button until the maintenance light begins to blink and then turns off.

Solution

1. Preparation

Gather all necessary tools and ensure you are in a well-lit environment.
Have your vehicle parked on a level surface with the engine off.

2. Access the Ignition

Insert the ignition key into the ignition switch and turn it to the "ON" position without starting the engine.

3. Set the Odometer

Make sure the odometer is displayed. If it is not, press the "Trip" button until the odometer reading appears.

4. Reset the Maintenance Light

Turn the ignition off.
Press and hold the "Trip" or "Reset" button on the dashboard.
While holding the button, turn the ignition back to the "ON" position.
Keep holding the button until the maintenance light starts blinking and then turns off.

5. Final Check

Release the "Trip" button and turn the ignition off once more.
Start the engine to verify that the maintenance light has been reset.