my Honda Accord doesn't start but lights come on what's the issue

Solution

1. Preparation

• Gather tools and safety equipment.
• Ensure the vehicle is in park (or neutral) with the parking brake engaged.
• Disconnect the negative battery terminal to prevent any electrical shorts.

2. Battery Inspection and Replacement

• Sub-steps:
  1. Clean battery terminals with a wire brush to remove any corrosion.
  2. Reconnect the battery terminals securely.
  3. If the battery voltage is low, charge the battery or replace it if necessary.
• Tools Required: Wire brush, battery terminal cleaner, multimeter.

3. Starter Motor Testing

• Sub-steps:
  1. Locate the starter motor, typically found on the lower side of the engine near the transmission.
  2. Use a multimeter to check for voltage at the starter solenoid terminal when the ignition is turned to the start position.
  3. If voltage is present but the starter doesn’t engage, replace the starter motor.
  4. If no voltage is present, check wiring and ignition switch.
• Tools Required: Multimeter, socket set.

4. Fuses and Relays Inspection

• Sub-steps:
  1. Locate the fuse box and identify the fuses related to the starting system.
  2. Remove and inspect each fuse to ensure they are intact; replace any blown fuses.
  3. Check the starter relay for continuity and replace if faulty.
• Tools Required: Fuse puller or needle-nose pliers.