why does my Honda Accord have a popping noise when turning

Honda Accord 10th Generation (2018-2022)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

497 words

Problem Statement

Learn how to diagnose and fix popping noise when turning in Honda Accord. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical systems.
•Allow the vehicle to cool before performing any work.

Symptoms

•Popping or clicking noise during turns
•Noise occurs when turning left or right
•Increased vibration in the steering wheel
•Unusually tight or loose steering feel
•Visible wear or damage on suspension components

Diagnostic Steps

1
Inspect the outer CV joints for damage or wear.
2
Check the inner CV joints for any signs of grease leakage or wear.
3
Examine suspension components, including struts and control arms, for damage.
4
Test the power steering fluid level and condition.
5
Look for any loose or damaged bolts in the suspension system.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Socket set
•Torque wrench
•Pry bar
•Pliers

Parts Required

•CV joint or axle (if damaged)
•Suspension components (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the outer CV joints for damage or wear.
2
Check the inner CV joints for any signs of grease leakage or wear.
3
Examine suspension components, including struts and control arms, for damage.
4
Test the power steering fluid level and condition.
5
Look for any loose or damaged bolts in the suspension system.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a flat surface and engage the parking brake.
Disconnect the battery to ensure safety while working on electrical components.

2. Inspect and Replace CV Joints

Lift the Vehicle: Use a jack to lift the front of the vehicle and secure it with jack stands.
Remove Wheel: Take off the front wheel by loosening the lug nuts with a socket set.
Inspect CV Joints:
- Check for any visible damage or play in the outer and inner CV joints.
- If damaged, proceed to replace the affected joint.
Remove CV Axle:
- Loosen the axle nut and remove it.
- Detach the CV axle from the transmission and hub.
Install New CV Joint/Axle:
- Insert the new CV joint or axle into the hub and transmission, ensuring it is seated correctly.
- Reinstall the axle nut and torque it to manufacturer's specifications (usually around 150-200 ft-lbs).
Reinstall Wheel: Put the wheel back on and securely tighten the lug nuts.

3. Inspect Suspension Components

Visual Inspection: Check all suspension components for signs of wear or damage, especially bushings and mounts.
Replace Worn Parts: If any components are found to be damaged, replace them as necessary.
Torque Specifications: Ensure all bolts are torqued to the manufacturer's specifications when reassembling.