why is my Honda Accord using more oil than usual?

Honda Accord 10th Generation (2018-2022)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

519 words

Problem Statement

Learn how to diagnose and fix excessive oil consumption in Honda Accord. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before performing any maintenance procedures.

Symptoms

•Engine oil level drops significantly between oil changes
•Blue smoke from the exhaust during acceleration
•Increased oil consumption without visible leaks
•Engine knocking noise due to low oil levels
•Possible check engine light illumination

Diagnostic Steps

1
Inspect the oil level and condition using the dipstick.
2
Check for any visible oil leaks around the engine and under the vehicle.
3
Perform a compression test on each cylinder to assess engine health.
4
Inspect the PCV (Positive Crankcase Ventilation) system for blockages or malfunctions.
5
Check for oil consumption through the intake system or turbocharger (if applicable).
6
Scan for diagnostic trouble codes using an OBD-II scanner.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Oil filter wrench
•Compression tester
•Oil drain pan

Parts Required

•New oil filter
•New PCV valve
•Engine oil (appropriate grade)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the oil level and condition using the dipstick.
2
Check for any visible oil leaks around the engine and under the vehicle.
3
Perform a compression test on each cylinder to assess engine health.
4
Inspect the PCV (Positive Crankcase Ventilation) system for blockages or malfunctions.
5
Check for oil consumption through the intake system or turbocharger (if applicable).
6
Scan for diagnostic trouble codes using an OBD-II scanner.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the engine is cool and parked on a level surface.
Disconnect the battery to ensure safety during the repair.

2. Inspect and Replace PCV Valve

Locate the PCV valve on the engine (usually on the valve cover).
Remove the PCV valve from its housing.
Inspect the valve for blockages or signs of wear.
Replace with a new PCV valve if necessary, ensuring it fits snugly.

3. Perform an Oil Change

Place an oil drain pan under the oil pan.
Remove the oil drain plug using a socket set and allow the old oil to drain completely.
Replace the oil filter with a new one, using an oil filter wrench.
Reinstall the drain plug and torque to the manufacturer’s specifications (typically around 20-30 ft-lbs).
Fill with the appropriate grade of oil (check the owner’s manual) and run the engine for a few minutes to circulate.

4. Conduct a Compression Test

Remove the spark plugs for access to the cylinders.
Insert the compression tester into the spark plug hole.
Crank the engine and record the readings for each cylinder.
Compare the readings to manufacturer specifications; low compression may indicate worn piston rings or valves.