Honda Accord Eleventh Generation (2023-present) ABS light is on what should I do

Solution

1. Preparation

• Gather tools and materials: OBD-II scanner, socket set, multimeter, brake fluid, cleaning supplies, and safety equipment (gloves and goggles).
• Disconnect the battery to ensure safety during repairs.

2. Check ABS Fuse

• Locate the fuse box (refer to the owner's manual for location).
• Remove the cover and identify the ABS fuse.
• Inspect the fuse; if blown, replace it with a fuse of the same amperage.

3. Inspect Wheel Speed Sensors

• Lift the vehicle using a jack and secure it with jack stands.
• Remove the wheels to access the wheel speed sensors.
• Inspect each sensor for dirt or damage; clean with a soft cloth if necessary.
• Check the electrical connectors for corrosion or loose connections.
• If damaged, replace the wheel speed sensor.

4. Brake Fluid Inspection

• Locate the brake fluid reservoir under the hood.
• Check the fluid level; if low, top off with the recommended brake fluid (DOT 3 or DOT 4 as specified).
• If the brake fluid appears contaminated, consider a brake fluid flush.

5. Rescan for Codes and Clear

• Reconnect the battery and start the vehicle.
• Use the OBD-II scanner to clear any diagnostic trouble codes (DTCs).
• Verify that the ABS light has turned off after clearing codes.