how to diagnose Honda Civic 11th Generation (2022-Present) suspension noise

Solution

1. Preparation

• Gather all necessary tools and parts.
• Park the vehicle on a flat, level surface and engage the parking brake.
• Wear safety gloves and goggles for protection.

2. Inspect and Replace Worn Components

• Inspect Shock Absorbers:

  1. Remove the wheel to access the shock absorber.
  2. Check for leakage around the seals; if leaking, replace the shock absorber.
  3. Use a torque wrench to ensure proper installation of the new shock absorber.

• Inspect and Replace Bushings:

  1. Remove affected suspension components as necessary to access bushings.
  2. Use a bushing removal tool to extract old bushings.
  3. Grease and press in new bushings, ensuring they are seated properly.

3. Tighten Loose Bolts

1. Go through each suspension component and tighten all bolts to the specified torque values from the manufacturer’s service manual.
2. Reassemble any components removed during inspection.

4. Test Drive

1. After repairs, perform a test drive to ensure the noise has been resolved.
2. Listen for any remaining sounds and recheck any components as necessary.