FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix misfire code P0302 in my Honda Civic 11th Generation (2022-Present) - Honda Accord
Home/Cars/Honda/Accord/11th Gen (2023-Present)/how to fix misfire code P0302 in my Honda Civic 11th Generation (2022-Present)

how to fix misfire code P0302 in my Honda Civic 11th Generation (2022-Present)

Honda Accord 11th Gen (2023-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Error Code: P0302
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
592 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0302 cylinder 2 misfire in Honda Civic 11th Generation. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0302
Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before opening any components.

Symptoms

  • •Check engine light illuminated
  • •Rough idle or engine shaking
  • •Decreased acceleration or power loss
  • •Poor fuel economy
  • •Increased exhaust emissions

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Spark plug socket
  • •Fuel injector removal tool

Parts Required

  • •Spark plug (specific to your engine)
  • •Ignition coil (for cylinder 2)
  • •Fuel injector (for cylinder 2)

Additional Information

Error Code
P0302
Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the battery to prevent electrical shorts.
  • Allow the engine to cool before proceeding with repairs.
2. Inspect and Replace Ignition Components

  1. Remove Engine Cover (if applicable):

    • Use a socket set to remove bolts securing the engine cover.
    • Carefully lift and set aside the engine cover.

  2. Remove Spark Plug:

    • Use a spark plug socket to unscrew the spark plug from cylinder 2.
    • Inspect the spark plug for wear; replace if necessary.

  3. Inspect and Replace Ignition Coil:

    • Disconnect the electrical connector from the ignition coil.
    • Remove the ignition coil mounting bolt using a socket wrench.
    • Pull the ignition coil out and inspect it for damage; replace if faulty.

  4. Install New Spark Plug and Coil:

    • Install a new spark plug into cylinder 2 using the correct torque (typically 13-16 lb-ft).
    • Install the new ignition coil, securing it with the bolt and reconnecting the electrical connector.
3. Inspect Fuel Injector

  1. Remove Fuel Injector Connector:

    • Disconnect the electrical connector from the fuel injector for cylinder 2.

  2. Remove the Fuel Injector:

    • Use the appropriate tool to unclip and remove the fuel injector from its rail.
    • Inspect for clogs or damage; clean or replace as necessary.

  3. Install New Fuel Injector:

    • Install the new or cleaned fuel injector, ensuring it seats properly in the rail.
    • Reconnect the electrical connector.
4. Reassemble and Test

  1. Reinstall Engine Cover:

    • Place the engine cover back on and secure it with bolts.

  2. Reconnect Battery:

    • Reconnect the battery terminal and ensure it is tight.

  3. Start the Engine:

    • Start the engine and listen for any abnormal sounds.
    • Allow the engine to idle and monitor for check engine light.