how to reset my Honda Civic 11th Generation (2022-Present) maintenance light?

Honda Accord 11th Gen (2023-Present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

375 words

Problem Statement

Learn how to reset the maintenance light on your 2022 Honda Civic 11th Generation. Follow our step-by-step guide for a quick and easy solution.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and the engine is off before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Possible notification for oil change or service reminder
•No other error codes or warning lights present

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Locate the trip button on the dashboard.
3
Press the trip button until the trip meter displays 'Odo' (odometer).
4
Turn off the ignition completely.
5
Press and hold the trip button while turning the ignition back to the 'ON' position.
6
Continue holding the trip button until the maintenance light resets and the odometer displays '000000'.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle key fob

Parts Required

•None required for the reset.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Locate the trip button on the dashboard.
3
Press the trip button until the trip meter displays 'Odo' (odometer).
4
Turn off the ignition completely.
5
Press and hold the trip button while turning the ignition back to the 'ON' position.
6
Continue holding the trip button until the maintenance light resets and the odometer displays '000000'.

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface and the ignition is off.
Have the vehicle key fob ready to access the ignition.

2. Turn Ignition On

Insert the key fob into the ignition or press the start button.
Turn the ignition switch to the “ON” position without starting the engine.

3. Access Trip Meter

Locate the trip button, usually found on the instrument cluster.
Press the trip button until the display shows “Odo”.

4. Turn Off Ignition

Turn the ignition switch to the “OFF” position completely.

5. Reset Maintenance Light

Press and hold the trip button.
While holding the trip button, turn the ignition back to the “ON” position.
Continue holding the trip button until the maintenance light resets and the odometer shows “000000”.

6. Verification

Release the trip button.
Turn off the ignition again and turn it back on to ensure the maintenance light is no longer illuminated.