how to reset the maintenance light on Honda Accord 9th Generation (2013-2017)

Honda Accord 11th Gen (2023-Present)

Error Codes

Less than 15 minutes

Time

easy

Difficulty

low

Severity

2 min read

358 words

Problem Statement

Learn how to reset the maintenance light on a 2013-2017 Honda Accord. Step-by-step guide with diagnostic steps and verification procedures.

Affected Component

Electrical

Estimated Time

Less than 15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' and the engine is off during the reset process.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder for oil change or maintenance displayed
•No engine performance issues are present

Diagnostic Steps

1
Ensure the vehicle is turned off and in the 'Park' position.
2
Turn the ignition key to the 'ON' position without starting the engine.
3
Confirm that the odometer is displayed on the dashboard.
4
Press the 'Select/Reset' button on the dashboard until the oil life percentage is displayed.
5
Press and hold the 'Select/Reset' button for about 10 seconds until the maintenance light begins to blink and then turns off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle key

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is turned off and in the 'Park' position.
2
Turn the ignition key to the 'ON' position without starting the engine.
3
Confirm that the odometer is displayed on the dashboard.
4
Press the 'Select/Reset' button on the dashboard until the oil life percentage is displayed.
5
Press and hold the 'Select/Reset' button for about 10 seconds until the maintenance light begins to blink and then turns off.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface and the engine is off.
Gather the necessary tools, which may include the car key for ignition.

2. Ignition Position

Insert the key into the ignition.
Turn the key to the "ON" position (do not start the engine).

3. Display Odometer

Check that the odometer reading is displayed on the dashboard. If not, press the "Select/Reset" button until it appears.

4. Resetting the Maintenance Light

Press and hold the "Select/Reset" button until the oil life percentage appears.
Continue holding the button for approximately 10 seconds until the maintenance light blinks and then turns off.

5. Verification

Turn off the ignition and then restart the vehicle to confirm that the maintenance light is no longer illuminated.