how to reset the maintenance light on Honda Accord 9th Generation (2013-2017)

Honda Accord 11th Gen (2023-Present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

352 words

Problem Statement

Learn how to reset the maintenance light on your 2013-2017 Honda Accord. Step-by-step guide to ensure your dashboard is clear of alerts.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location to avoid accidents while performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•No other warning lights present
•Light remains on despite completing scheduled maintenance

Diagnostic Steps

1
Ensure the vehicle is in the OFF position and the keys are removed from the ignition.
2
Insert the key into the ignition and turn it to the 'ON' position (do not start the engine).
3
Press the gas pedal three times within 5 seconds.
4
Turn the ignition off and then back to the 'ON' position.
5
Check if the maintenance light has turned off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle key

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the OFF position and the keys are removed from the ignition.
2
Insert the key into the ignition and turn it to the 'ON' position (do not start the engine).
3
Press the gas pedal three times within 5 seconds.
4
Turn the ignition off and then back to the 'ON' position.
5
Check if the maintenance light has turned off.

Solution

1. Preparation

Gather necessary tools: vehicle key, and ensure the vehicle is parked safely.
Ensure the vehicle is turned off and in a safe location.

2. Turn the Ignition On

Insert the key into the ignition.
Turn the key to the "ON" position without starting the engine.

3. Press the Gas Pedal

Quickly press the gas pedal three times within 5 seconds.
Ensure each press is deliberate and fully released.

4. Turn Off the Ignition

Turn the ignition back to the "OFF" position.
Remove the key from the ignition.

5. Verify the Reset

Return the key to the "ON" position again.
Check the dashboard to ensure the maintenance light is no longer illuminated.