how to reset the maintenance light on Honda Accord 9th Generation (2013-2017)

Honda Accord 11th Gen (2023-Present)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

328 words

Problem Statement

Learn how to reset the maintenance light on your 2013-2017 Honda Accord 9th Generation. Step-by-step guide for quick and easy reset.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and on a flat surface before starting the reset procedure.

Symptoms

•Maintenance light illuminated on the dashboard
•Possible accompanying message on the display indicating maintenance required
•No engine performance issues related to the light being on

Diagnostic Steps

1
Ensure the vehicle is parked and turned off.
2
Insert the key into the ignition (or press the start button without pressing the brake pedal).
3
Press the gas pedal three times within five seconds.
4
Turn the ignition to the 'ON' position without starting the engine.
5
Check if the maintenance light has turned off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked and turned off.
2
Insert the key into the ignition (or press the start button without pressing the brake pedal).
3
Press the gas pedal three times within five seconds.
4
Turn the ignition to the 'ON' position without starting the engine.
5
Check if the maintenance light has turned off.

Solution

1. Preparation

Ensure the vehicle is in a safe, well-ventilated area.
Gather necessary tools: None required for this procedure.

2. Key Positioning

Insert the key into the ignition or prepare to use the start button.
If using a keyless start, ensure the vehicle is in the "OFF" position.

3. Ignition Sequence

Turn the ignition to the "ON" position without starting the engine.
(For push-button start) Press the start button without pressing the brake pedal.

4. Gas Pedal Sequence

Quickly press the gas pedal three times within a span of five seconds.
Watch for the maintenance light on the dashboard.

5. Verification

Turn the ignition off and then back on to confirm that the maintenance light has been reset.