FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Honda Accord 9th Generation (2013-2017) - Honda Accord
Home/Cars/Honda/Accord/11th Gen (2023-Present)/how to reset the maintenance light on Honda Accord 9th Generation (2013-2017)

how to reset the maintenance light on Honda Accord 9th Generation (2013-2017)

Honda Accord 11th Gen (2023-Present)

Error Codes
5 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
303 words

Problem Statement

Learn how to reset the maintenance light on Honda Accord 2013-2017. Step-by-step guide with diagnostic steps and verification instructions.

Affected Component
Electrical
Estimated Time
5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in park and on a level surface during the reset procedure.

Symptoms

  • •Maintenance light remains illuminated on the dashboard
  • •No other warning lights present
  • •Vehicle has undergone recent oil change or service

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Ensure the vehicle is parked safely and the engine is off.

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Tools Required: None needed for this procedure.
  • Ensure the vehicle is parked safely and the engine is off.
2. Accessing the Maintenance Reset Procedure
  1. Turn Ignition On:

    • Insert the key into the ignition and turn it to the "ON" position without starting the engine.
  2. Press the Gas Pedal:

    • Quickly press the gas pedal three times within five seconds. This action triggers the reset sequence.
  3. Turn Ignition Off:

    • Turn the ignition back to the "OFF" position after pressing the gas pedal.
  4. Verify Reset:

    • Turn the ignition to the "ON" position again to check if the maintenance light has been reset.