FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Honda Accord Eleventh Generation (2023-present) - Honda Accord
Home/Cars/Honda/Accord/11th Gen (2023-Present)/how to reset the maintenance light on Honda Accord Eleventh Generation (2023-present)

how to reset the maintenance light on Honda Accord Eleventh Generation (2023-present)

Honda Accord 11th Gen (2023-Present)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
371 words

Problem Statement

Learn how to reset the maintenance light on Honda Accord Eleventh Generation (2023-present) with this step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is parked on a flat surface and the ignition is off while performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder for oil change or service displayed
  • •No change in vehicle performance

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •No specific tools required

Parts Required

  • •No parts required for the reset process

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: no specific tools are required for this process.
  • Ensure the vehicle is parked safely with the engine off.
2. Reset Maintenance Light
  1. Turn the vehicle ignition to the "ON" position without starting the engine.
  2. Press the odometer/display button until the odometer shows "Trip A."
  3. Turn the ignition switch to the "OFF" position.
  4. Press and hold the odometer/display button.
  5. While holding the button, turn the ignition back to the "ON" position (do not start the engine).
  6. Continue holding the button until the maintenance light begins to blink and then turns off, indicating the reset is complete.
  7. Release the button and check the display to confirm that the oil life shows "100%."