FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Honda Accord Eleventh Generation (2023-present) - Honda Accord
Home/Cars/Honda/Accord/11th Gen (2023-Present)/how to reset the maintenance light on Honda Accord Eleventh Generation (2023-present)

how to reset the maintenance light on Honda Accord Eleventh Generation (2023-present)

Honda Accord 11th Gen (2023-Present)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
338 words

Problem Statement

Learn how to reset the maintenance light on your 2023-present Honda Accord. Step-by-step guide for quick and easy maintenance tracking.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe, stationary position before starting the reset process.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder for oil change or service displayed
  • •No engine performance issues but requires a reset for maintenance tracking

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required.
  • Ensure the vehicle is in a safe location, with the engine off.
2. Accessing the Maintenance Reset Function

  1. Turn the Ignition On

    • Insert the key or press the start button to turn the ignition to the "ON" position (do not start the engine).

  2. Activate the Reset Procedure

    • Press the accelerator pedal (gas pedal) three times within five seconds. This should trigger the maintenance reset mode.

  3. Confirm Reset

    • Observe the maintenance light. It should blink and then turn off, indicating the reset was successful.
3. Finalize the Process

  1. Turn Off the Ignition

    • Turn the ignition back to the "OFF" position.

  2. Start the Engine

    • Start the engine to confirm that the maintenance light is no longer illuminated.