how to reset the maintenance light on my Honda Accord Eleventh Generation (2023-present)

Honda Accord 11th Gen (2023-Present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

3 min read

404 words

Problem Statement

Learn how to reset the maintenance light on your 2023 Honda Accord. Step-by-step guide to ensure your maintenance reminders are accurate.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and in 'Park' (for automatic transmissions) or neutral (for manual transmissions) before performing the reset.

Symptoms

•Maintenance light is illuminated on the dashboard
•Service reminder message displayed on the dashboard
•No performance issues; light remains after maintenance is performed

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Use the odometer/trip button to navigate to the 'Maintenance' section on the driver’s display.
3
Check for any additional messages or options related to maintenance reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for the reset process.

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is in a safe environment, parked on a level surface.
Have the vehicle's key fob or smart key ready.

2. Turn the Ignition ON

Insert the key into the ignition or press the start button without pressing the brake pedal to turn on the electrical systems (the dashboard lights should illuminate).

Locate the odometer/trip button on the dashboard.
Press and hold the odometer/trip button until the display shows the "Maintenance" menu.

4. Reset the Maintenance Light

Navigate through the options using the odometer/trip button until you highlight "Oil Life" or the relevant maintenance item.
Once highlighted, press and hold the odometer/trip button again until the display prompts for confirmation to reset the maintenance light.
Release the button when the reset confirmation appears.

5. Verify the Reset

Turn the ignition off and then back on to check if the maintenance light has turned off.
Confirm that the oil life percentage shows 100% or the appropriate level.