how to reset the maintenance light on my Honda Civic 11th Generation (2022-Present)

Honda Accord 11th Gen (2023-Present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

322 words

Problem Statement

Learn how to reset the maintenance light on your 2022-present Honda Civic 11th Generation. Step-by-step guide for quick and easy reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a well-ventilated area when performing any maintenance.

Symptoms

•Maintenance light is illuminated on the dashboard
•Vehicle may display 'Maintenance Due' message
•No performance issues; issue is primarily indicator-related

Diagnostic Steps

1
Ensure the vehicle is in the 'On' position without starting the engine.
2
Confirm that the odometer is displayed on the instrument cluster.
3
Locate the trip reset button on the dashboard.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools: None required for this process.
Ensure the vehicle is in a safe location with the engine off.

2. Accessing the Maintenance Reset

Turn the ignition key to the "On" position (do not start the engine).
Confirm the odometer is displayed (not trip A or B).
Press and hold the trip reset button until the odometer reading resets to 0.

3. Resetting the Maintenance Light

While holding the trip reset button, turn the ignition switch to the "Off" position.
Continue holding the trip reset button for about 10 seconds.
Release the trip reset button; the maintenance light should blink and then turn off.

4. Final Check

Turn the ignition to the "On" position again to verify that the maintenance light is no longer illuminated.