how to reset the maintenance light on my Honda Civic 11th Generation (2022-Present)?

Honda Accord 11th Gen (2023-Present)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

360 words

Problem Statement

Learn how to reset the maintenance light on your 2022 Honda Civic 11th Generation. Step-by-step guide for a quick and easy reset.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked safely and the engine is off before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•No engine performance issues
•No additional warning lights present

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position and the key is removed from the ignition.
2
Insert the key into the ignition and turn it to the 'ON' position without starting the engine.
3
Locate the odometer button on the instrument panel.
4
Press and hold the odometer button until the display shows the maintenance light reset message.
5
Release the button and turn the ignition off to finalize the reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ignition key
•Key fob

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position and the key is removed from the ignition.
2
Insert the key into the ignition and turn it to the 'ON' position without starting the engine.
3
Locate the odometer button on the instrument panel.
4
Press and hold the odometer button until the display shows the maintenance light reset message.
5
Release the button and turn the ignition off to finalize the reset.

Solution

1. Preparation

Gather necessary tools:
- Ignition key or key fob
Ensure the vehicle is parked in a safe location with the engine off.

2. Turn Ignition On

Insert the key into the ignition and turn to the "ON" position (do not start the engine).
Confirm that all dashboard lights illuminate, including the maintenance light.

3. Reset the Maintenance Light

Press and hold the odometer button (located on the instrument panel).
Continue holding the button until the maintenance light starts blinking and then turns off.
Release the odometer button.

4. Finalize the Reset

Turn off the ignition by turning the key back to the "OFF" position.
Remove the key from the ignition.