my Honda Accord Eleventh Generation (2023-present) ABS light is on what does that mean

Solution

1. Preparation

• Gather tools and parts needed for the repair.
• Disconnect the negative terminal of the battery before beginning work to avoid electrical shorts.
• Prepare a clean workspace and ensure safety gear is worn.

2. Check and Replace Wheel Speed Sensors

• Tools Required: Socket set, multimeter
• Remove the wheel corresponding to the sensor showing an issue.
• Disconnect the wheel speed sensor connector.
• Use a multimeter to check the sensor's resistance; replace if out of specification.
• Install the new sensor, reconnect the wiring, and reattach the wheel.

3. Inspect and Repair ABS Module and Wiring

• Tools Required: Socket set, wiring harness repair kit
• Remove any covers or shields to access the ABS module.
• Inspect the ABS module for any signs of physical damage or corrosion.
• Check the wiring harness for any frayed wires or poor connections; repair as needed.
• Reinstall any covers or shields removed during inspection.

4. Brake Fluid Check and Replacement

• Tools Required: Brake fluid, catch pan, funnel
• Check the brake fluid reservoir for proper fluid level and color; it should be clear and free of debris.
• If the fluid is contaminated, siphon out the old fluid using a catch pan and a funnel.
• Refill the reservoir with the appropriate type of brake fluid as specified in the owner’s manual.

5. Reset ABS Light

• Tools Required: OBD-II scanner
• Reconnect the battery terminal.
• Use an OBD-II scanner to clear any stored ABS error codes.
• Start the vehicle and observe the ABS light; it should remain off if the issue is resolved.