why does my Honda Civic 11th Generation (2022-Present) airbag light stay on

Solution

1. Preparation

• Gather necessary tools and parts.
• Ensure the vehicle is parked on a flat surface and the ignition is off.
• Disconnect the negative battery terminal to prevent accidental deployment of the airbags.

2. Clear Fault Codes

• Connect the OBD-II scanner to the vehicle's diagnostic port.
• Access the airbag module data and clear any stored fault codes.
• Disconnect the scanner and reconnect the negative battery terminal.

3. Inspect and Repair Airbag Components

• Airbag Module:

  • Locate the airbag module (typically under the center console or dashboard).
  • Remove the module by unscrewing the mounting bolts and disconnecting the wiring harness.
  • Inspect for any signs of damage or corrosion.
  • Replace the module if necessary.

• Seat Belt Pretensioners:

  • Check the pretensioners by inspecting the seat belt assemblies.
  • Disconnect the wiring harness and inspect the connectors.
  • Replace any faulty pretensioners.

4. Reassemble and Test

• Reconnect all wiring harnesses securely.
• Reinstall the airbag module and tighten the mounting bolts to the manufacturer's specifications (usually around 8-10 Nm).
• Reconnect the negative battery terminal and turn the ignition to the "On" position (do not start the engine).
• Observe the airbag light to ensure it turns off after a few seconds, indicating normal operation.