why does my Honda Civic 11th Generation (2022-Present) transmission slip when accelerating

Solution

1. Preparation

• Gather tools and parts before starting the repair.
• Ensure the vehicle is on a level surface and securely lifted if necessary.
• Disconnect the negative battery cable for safety.

2. Check and Replace Transmission Fluid

• Sub-step 1: Remove the transmission dipstick and check the fluid level; add fluid if low.
• Sub-step 2: If the fluid is dark or has a burnt smell, drain the transmission fluid.
• Sub-step 3: Replace with new manufacturer-recommended transmission fluid (typically Honda ATF DW-1).
• Tools Required: Transmission fluid pump, funnel, drain pan.

3. Inspect and Replace Transmission Filter (if applicable)

• Sub-step 1: Remove the transmission pan (if applicable) by loosening the bolts.
• Sub-step 2: Take out the old filter and install a new one.
• Sub-step 3: Clean the pan and replace the gasket before reattaching it.
• Tools Required: Socket set, gasket scraper, torque wrench.

4. Examine and Replace Transmission Solenoids

• Sub-step 1: Access the transmission control unit and locate the solenoids.
• Sub-step 2: Remove the electrical connectors and unscrew the solenoids.
• Sub-step 3: Install new solenoids and reconnect the wiring.
• Tools Required: Socket set, screwdriver.

5. Reconnect Battery and Test

• Sub-step 1: Reconnect the negative battery cable.
• Sub-step 2: Start the vehicle and perform a road test to ensure the transmission operates smoothly.
• Tools Required: None specific to this step.