how to fix Honda Accord 9th Generation (2013-2017) brake noise when reversing

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

4 min read

602 words

Problem Statement

Learn how to diagnose and fix brake noise when reversing in Honda Accord 2013-2017. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always engage the parking brake before performing brake work.
•Allow brake components to cool before handling if the vehicle has been driven recently.

Symptoms

•Squeaking or squealing noise when reversing
•Grinding noise when braking in reverse
•Vibration in the brake pedal
•Reduced braking efficiency
•Possible warning light on the dashboard

Diagnostic Steps

1
Inspect brake pads for wear: Remove the wheel to visually assess the condition of the brake pads.
2
Check brake rotors for scoring or warping: Use a brake rotor gauge to measure thickness and inspect for grooves.
3
Examine brake hardware: Inspect calipers, shims, and clips for proper installation and wear.
4
Test the brake fluid: Ensure that the brake fluid level is adequate and is not contaminated.
5
Listen for noise while applying brakes: With the vehicle safely lifted, have an assistant apply the brakes while the vehicle is in reverse to isolate the source of the noise.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Lug wrench
•Socket set
•Brake cleaner
•Torque wrench

Parts Required

•Brake pads
•Brake rotors

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake pads for wear: Remove the wheel to visually assess the condition of the brake pads.
2
Check brake rotors for scoring or warping: Use a brake rotor gauge to measure thickness and inspect for grooves.
3
Examine brake hardware: Inspect calipers, shims, and clips for proper installation and wear.
4
Test the brake fluid: Ensure that the brake fluid level is adequate and is not contaminated.
5
Listen for noise while applying brakes: With the vehicle safely lifted, have an assistant apply the brakes while the vehicle is in reverse to isolate the source of the noise.

Solution

1. Preparation

Tools Required: Jack and jack stands, lug wrench, socket set, brake cleaner, and torque wrench.
Safety Warnings: Always engage the parking brake and wear safety glasses.

2. Remove Wheel

Loosen lug nuts while the vehicle is on the ground.
Lift the vehicle using a jack and secure it with jack stands.
Remove the lug nuts completely and take off the wheel to access the brake components.

3. Inspect and Replace Brake Pads

Inspect Brake Pads:
- Remove the caliper by unscrewing the caliper bolts.
- Slide the caliper off the rotor and hang it using a bungee cord (do not let it dangle by the brake line).
- Inspect the brake pads for thickness; if less than 3mm, they should be replaced.
Replace Brake Pads:
- Remove the old brake pads from the caliper bracket.
- Apply brake grease to the backing of the new pads (avoid the friction surface).
- Install the new brake pads into the caliper bracket.

4. Inspect and Replace Brake Rotors (if necessary)

If the rotors are found to be scored or warped, they should be replaced.
Remove the rotor by unscrewing the retaining screws (if applicable) or sliding it off the hub.
Install new rotors; ensure they are clean and free of any protective coating with brake cleaner before installation.

5. Reassemble Components

Reattach the caliper over the new pads and rotor.
Tighten the caliper bolts to the manufacturer’s specified torque (usually around 25-30 ft-lbs for most vehicles).
Reinstall the wheel and hand-tighten the lug nuts.
Lower the vehicle and then tighten the lug nuts to the manufacturer’s torque specification (typically around 80-100 ft-lbs).