how to fix Honda Accord 9th Generation (2013-2017) rear view camera malfunction

Honda Accord Eleventh Generation (2023-present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

540 words

Problem Statement

Learn how to diagnose and fix rear view camera malfunction in Honda Accord 9th Generation (2013-2017). Step-by-step guide with diagnostic procedures.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe position and the parking brake is engaged before performing repairs.

Symptoms

•Blank screen when the vehicle is in reverse
•Distorted or fuzzy camera image
•"Camera System Malfunction" warning on the display
•No guidelines or grid lines displayed
•Inconsistent camera operation (works intermittently)

Diagnostic Steps

1
Inspect the camera lens for dirt or obstructions.
2
Check the camera connection harness for corrosion or loose connections.
3
Use an OBD-II scanner to check for any related error codes.
4
Test the rear view camera voltage using a multimeter.
5
Inspect the vehicle’s fuse box for a blown fuse related to the rear camera system.
6
Verify the proper operation of the display unit by checking other features.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Screwdriver set
•Soft cleaning cloth

Parts Required

•Rear view camera (if replacement is necessary)
•Fuse (if blown)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the camera lens for dirt or obstructions.
2
Check the camera connection harness for corrosion or loose connections.
3
Use an OBD-II scanner to check for any related error codes.
4
Test the rear view camera voltage using a multimeter.
5
Inspect the vehicle’s fuse box for a blown fuse related to the rear camera system.
6
Verify the proper operation of the display unit by checking other features.

Solution

1. Preparation

Gather all required tools and parts.
Ensure the vehicle is parked on a flat surface and the ignition is off.

2. Inspect and Clean the Camera

Sub-steps:
1. Locate the rear view camera, typically mounted above the license plate.
2. Clean the camera lens with a soft cloth to remove dirt or debris.
3. Check for any physical damage to the camera housing.

3. Check Connections

Sub-steps:
1. Remove the camera assembly from its mount, carefully disconnecting the wiring harness.
2. Inspect the wiring harness for signs of wear, corrosion, or damage.
3. Reconnect the harness securely and ensure there are no loose connections.

4. Test Voltage

Sub-steps:
1. Connect a multimeter to the camera’s power connector.
2. Put the vehicle in reverse (ensure the parking brake is engaged for safety).
3. Verify that the voltage reading is within the manufacturer’s specifications (typically around 12V).
4. If no voltage is present, trace the wiring back to the source and check for breaks or shorts.

5. Fuse Inspection

Sub-steps:
1. Locate the fuse box (refer to the owner's manual for the exact location).
2. Identify the fuse related to the rear view camera and remove it.
3. Inspect the fuse for continuity; replace it if blown with the same amperage rating.
4. Reinsert the fuse and check for proper operation.

6. Reassemble and Test

Sub-steps:
1. Reinstall the camera assembly securely.
2. Start the vehicle and place it in reverse to test the camera functionality.
3. Observe if the image displays correctly on the screen.