how to fix Honda Accord 9th Generation (2013-2017) suspension noise

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

527 words

Problem Statement

Learn how to diagnose and fix suspension noise in Honda Accord 9th Generation (2013-2017). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is securely supported on jack stands before working underneath.
•Disconnect the battery if working on electrical components related to the suspension.

Symptoms

•Clunking or rattling noise over bumps
•Squeaking noises when going over speed bumps or uneven surfaces
•Steering wheel vibration or looseness
•Uneven tire wear
•Vehicle pulling to one side

Diagnostic Steps

1
Inspect suspension components visually for signs of wear or damage, such as bushings, struts, and control arms.
2
Check for loose bolts or fasteners within the suspension system using a torque wrench.
3
Perform a bounce test by pushing down on each corner of the vehicle to assess the strut response.
4
Examine the tires for irregular wear patterns that may indicate alignment issues.
5
Use a stethoscope or similar tool to isolate the noise while driving over bumps.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Hydraulic jack
•Jack stands
•Torque wrench
•Socket set
•Stethoscope

Parts Required

•Replacement bushings (if worn)
•Replacement struts or shocks (if necessary)
•Control arms (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect suspension components visually for signs of wear or damage, such as bushings, struts, and control arms.
2
Check for loose bolts or fasteners within the suspension system using a torque wrench.
3
Perform a bounce test by pushing down on each corner of the vehicle to assess the strut response.
4
Examine the tires for irregular wear patterns that may indicate alignment issues.
5
Use a stethoscope or similar tool to isolate the noise while driving over bumps.

Solution

1. Preparation

Gather tools and parts required for the repair.
Park the vehicle on a flat surface and engage the parking brake.
Place wheel chocks behind the rear wheels to prevent movement.

2. Raise the Vehicle

Use a hydraulic jack to lift the vehicle and secure it on jack stands.
Remove the front or rear wheels, depending on which suspension components are being serviced.

3. Inspect and Replace Worn Components

Check Bushings:
- Remove any retaining clips or bolts holding the bushings.
- Inspect the bushings for cracks or deterioration. Replace if necessary.
Check Struts/Shocks:
- Remove the strut assembly by unscrewing the bolts at the top and bottom.
- Inspect for oil leaks or signs of wear. Replace if necessary.
Check Control Arms:
- Inspect control arms for cracks or bending. Replace if necessary.

4. Reassemble Suspension

Reinstall any replaced or repaired components.
Ensure all bolts and fasteners are torqued to manufacturer specifications (typically 50-70 ft-lbs for strut bolts).

5. Alignment

After replacing components, take the vehicle to a professional alignment shop to ensure proper alignment of the wheels.

6. Reinstall Wheels

Reattach the wheels and torque the lug nuts to the manufacturer's specifications (usually 80-100 ft-lbs).
Lower the vehicle from the jack stands and remove the jack.