how to fix oil consumption issue in Honda Accord 9th Generation (2013-2017)

Honda Accord Eleventh Generation (2023-present)

Error Codes

3-5 hours

Time

hard

Difficulty

high

Severity

3 min read

534 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix excessive oil consumption in Honda Accord 9th Generation (2013-2017). Step-by-step guide with symptoms and solutions.

Affected Component

Engine

Estimated Time

3-5 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the valve cover.

Symptoms

•Check engine light illuminated
•Oil warning light activated
•Increased exhaust smoke, especially during acceleration
•Frequent need to add oil between changes
•Poor fuel economy
•Engine noise due to low oil levels

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to check for any related engine faults.
2
Inspect the engine oil level and condition using the dipstick.
3
Check for external oil leaks around the engine and under the vehicle.
4
Inspect the PCV (Positive Crankcase Ventilation) system for blockages or malfunctions.
5
Perform a compression test on each cylinder to assess engine health.
6
Conduct a leak-down test to identify any internal engine issues.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Gasket scraper
•Oil catch pan

Parts Required

•PCV valve
•Valve cover gasket
•Engine oil (0W-20)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to check for any related engine faults.
2
Inspect the engine oil level and condition using the dipstick.
3
Check for external oil leaks around the engine and under the vehicle.
4
Inspect the PCV (Positive Crankcase Ventilation) system for blockages or malfunctions.
5
Perform a compression test on each cylinder to assess engine health.
6
Conduct a leak-down test to identify any internal engine issues.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and the engine is cool.
Disconnect the battery to prevent any electrical issues during repairs.

2. Inspect and Replace PCV Valve

Locate the PCV valve on the valve cover.
Remove the PCV valve by twisting and pulling it out.
Inspect the valve for blockages or signs of wear.
If defective, install a new PCV valve and ensure it is seated properly.

3. Check and Replace Valve Cover Gasket

Remove any engine covers to access the valve cover.
Unscrew the valve cover bolts using a socket set and lift off the valve cover.
Inspect the valve cover gasket for wear or damage.
Clean the mating surfaces with a gasket scraper.
Install a new valve cover gasket, ensuring proper alignment.
Reattach the valve cover and torque the bolts to the manufacturer's specifications (usually around 7-10 ft-lbs).

4. Address Internal Engine Issues

If compression or leak-down tests indicate issues, consider the following:
- Remove the cylinder head for inspection.
- Replace piston rings if they are worn (requires significant disassembly).
- Inspect cylinder walls for scoring or damage.

5. Use High-Quality Engine Oil

After repairs, refill the engine with high-quality oil that meets Honda specifications (typically 0W-20 for the Accord).
Consider adding an oil additive designed to reduce consumption.