how to fix the cruise control not working on my Honda Accord 9th Generation (2013-2017)

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

521 words

Problem Statement

Learn how to diagnose and fix cruise control issues in Honda Accord 9th Generation (2013-2017). Step-by-step guide with symptoms and solutions.

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to avoid shocks.
•Ensure the vehicle is in a safe and stable position before performing any repairs.

Symptoms

•Cruise control indicator light not illuminating
•Inability to set or adjust cruise control speed
•Cruise control disengaging unexpectedly
•"Check Engine" light illuminated
•Unresponsive throttle when attempting to engage cruise control

Diagnostic Steps

1
Inspect the cruise control switch for physical damage or wear.
2
Check vehicle's OBD-II system for any stored trouble codes related to the cruise control system.
3
Verify the brake pedal switch function; ensure it is not stuck or malfunctioning.
4
Test the cruise control actuator for proper operation.
5
Inspect the vehicle's fuses related to the cruise control system for continuity.
6
Examine the throttle position sensor for accurate readings.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Screwdrivers
•Test light

Parts Required

•Cruise control switch (if defective)
•Brake pedal switch (if defective)
•Cruise control actuator (if defective)
•Fuses (if blown)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the cruise control switch for physical damage or wear.
2
Check vehicle's OBD-II system for any stored trouble codes related to the cruise control system.
3
Verify the brake pedal switch function; ensure it is not stuck or malfunctioning.
4
Test the cruise control actuator for proper operation.
5
Inspect the vehicle's fuses related to the cruise control system for continuity.
6
Examine the throttle position sensor for accurate readings.

Solution

1. Preparation

Tools Required: OBD-II scanner, multimeter, socket set, screwdrivers, and a test light.
Disconnect the negative battery terminal to prevent electrical shorts.

2. Inspect and Replace Cruise Control Switch

Locate the cruise control switch on the steering wheel.
Remove the airbag cover (if necessary) and disconnect the wiring harness.
Test the switch using a multimeter for continuity.
If faulty, replace with a new cruise control switch.
Reconnect the wiring harness and airbag cover.

3. Check Brake Pedal Switch

Locate the brake pedal switch mounted above the brake pedal.
Inspect the switch for proper alignment and function; it should not be stuck.
Using a multimeter, test for continuity when the brake pedal is pressed.
If defective, adjust or replace the brake pedal switch as needed.

4. Inspect Fuses

Locate the fuse box under the dashboard or engine compartment.
Identify the cruise control fuse and visually inspect for any blown fuses.
Replace any blown fuses with the correct amperage rating.

5. Test Cruise Control Actuator

Locate the cruise control actuator, typically near the throttle body.
Disconnect the actuator and test for proper operation using a multimeter.
If the actuator does not operate as specified, replace it with a new unit.