how to fix the door ajar sensor on my Honda Accord 9th Generation (2013-2017)

Honda Accord Eleventh Generation (2023-present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

532 words

Problem Statement

Learn how to diagnose and fix the door ajar sensor issue in your Honda Accord 9th Generation (2013-2017). Step-by-step guide with tools and tips.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on the electrical components to prevent short circuits.

Symptoms

•Dashboard door ajar warning light remains illuminated
•Interior lights do not turn off when doors are closed
•Possible chime or alert sounds indicating a door is ajar
•Difficulty locking doors with the key fob
•Intermittent issues with door locking or unlocking

Diagnostic Steps

1
Inspect each door for proper closure and alignment.
2
Use an OBD-II scanner to check for any error codes related to door sensors.
3
Visually inspect the door latch and the wiring harness for any visible damage or corrosion.
4
Test the door ajar switch, usually located in the door latch mechanism, for continuity using a multimeter.
5
Check the central locking system for any malfunctions that may affect the door ajar sensor.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Screwdrivers

Parts Required

•Door ajar switch (if replacement is necessary)
•Dielectric grease

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect each door for proper closure and alignment.
2
Use an OBD-II scanner to check for any error codes related to door sensors.
3
Visually inspect the door latch and the wiring harness for any visible damage or corrosion.
4
Test the door ajar switch, usually located in the door latch mechanism, for continuity using a multimeter.
5
Check the central locking system for any malfunctions that may affect the door ajar sensor.

Solution

1. Preparation

Gather tools and parts. Ensure the vehicle is parked on a flat surface and the ignition is off.
Tools required: OBD-II scanner, multimeter, socket set, screwdrivers, and dielectric grease.

2. Inspect and Test Door Ajar Switch

Sub-step 1: Open the door and locate the door latch mechanism.
Sub-step 2: Disconnect the wiring harness from the door ajar switch.
Sub-step 3: Using a multimeter, set it to continuity mode. Probe the switch terminals to check if the switch opens and closes properly when the door is opened and closed.
Sub-step 4: If the switch fails the continuity test, replace it.

3. Replace Door Ajar Switch (if necessary)

Sub-step 1: Remove the door panel using a socket set and screwdrivers to access the door latch mechanism.
Sub-step 2: Unbolt the old door ajar switch from the latch assembly.
Sub-step 3: Install the new door ajar switch, ensuring it is securely fastened.
Sub-step 4: Reconnect the wiring harness to the switch.
Sub-step 5: Reattach the door panel and secure it with screws.

4. Clean and Lubricate Door Latch

Sub-step 1: Apply dielectric grease to the door latch mechanism to prevent corrosion and ensure smooth operation.
Sub-step 2: Ensure that the door latch fully engages when the door is closed.

5. Recheck Functionality

Sub-step 1: Close all doors and check if the dashboard door ajar light turns off.
Sub-step 2: Test the locking mechanism with the key fob to ensure proper operation.