how to fix the rear suspension noise in my Honda Accord 9th Generation (2013-2017)

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

482 words

Problem Statement

Learn how to diagnose and fix rear suspension noise in Honda Accord 9th Generation (2013-2017). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is securely supported on jack stands before working underneath it.
•Allow the vehicle to cool before working on any suspension components.

Symptoms

•Clunking or rattling noise when driving over bumps
•Squeaking or creaking sounds during turns
•Uneven tire wear on the rear tires
•Poor ride comfort or handling
•Vehicle sagging at the rear end

Diagnostic Steps

1
Inspect the rear suspension components visually for any signs of wear or damage.
2
Check for loose bolts and nuts on the suspension assembly.
3
Use a jack to lift the rear of the vehicle and check the shock absorbers for leaks.
4
Perform a bounce test on the rear end to assess shock absorber performance.
5
Inspect the rear control arms and bushings for deterioration or play.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Hydraulic jack
•Jack stands
•Socket set
•Torque wrench
•Bushing tool

Parts Required

•Rear shock absorbers
•Control arm bushings

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the rear suspension components visually for any signs of wear or damage.
2
Check for loose bolts and nuts on the suspension assembly.
3
Use a jack to lift the rear of the vehicle and check the shock absorbers for leaks.
4
Perform a bounce test on the rear end to assess shock absorber performance.
5
Inspect the rear control arms and bushings for deterioration or play.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface and the parking brake is engaged.

2. Lift the Vehicle

Use a hydraulic jack to raise the rear of the vehicle.
Secure it with jack stands for safety.

3. Inspect and Replace Components

Inspect Shock Absorbers:
- Check for fluid leaks.
- If leaking, remove the upper and lower mounting bolts using a socket set.
- Install new shock absorbers, tightening bolts to manufacturer specifications (typically around 30-50 lb-ft).
Check and Replace Bushings:
- Inspect rear control arm bushings for cracks or wear.
- If damaged, remove the control arm by unbolting it from the frame and wheel hub.
- Replace old bushings with new ones using a press or bushing tool.
Tighten Loose Bolts:
- Ensure that all bolts and nuts associated with the suspension are tightened to the specified torque values.

4. Reassembly

Reinstall any components that were removed for inspection or replacement.
Lower the vehicle and perform a final check of all suspension components.

5. Test Drive

Take the vehicle for a test drive to verify that the noise has been resolved and the ride quality is improved.