how to reset maintenance lights on Honda Accord 9th Generation (2013-2017)

Honda Accord Eleventh Generation (2023-present)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

387 words

Problem Statement

Learn how to reset the maintenance light on Honda Accord 9th Generation (2013-2017) with this simple step-by-step guide. Clear reminders easily.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' and the parking brake is engaged during the reset process.

Symptoms

•Maintenance light remains illuminated on the dashboard
•Message indicating maintenance is due appears on the display
•Vehicle owner wants to clear reminders after service

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Press the 'Gas' pedal three times within 5 seconds.
3
Turn the ignition switch to the 'OFF' position.
4
Start the engine to verify that the maintenance light is off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for this process.

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: None required for this process.
Ensure that the vehicle is parked safely with the ignition turned off before beginning the reset process.

2. Accessing the Ignition

Insert the key into the ignition or ensure the key fob is in the vehicle if equipped with a push-start button.

3. Turning on the Ignition

Turn the ignition switch to the "ON" position. Make sure not to start the engine; the dashboard lights should illuminate.

4. Resetting the Maintenance Light

Quickly press the accelerator pedal (gas pedal) three times within 5 seconds.
Make sure to complete the presses within the time frame for the system to register the reset command.

5. Turning Off the Ignition

After the third press, turn the ignition switch to the "OFF" position to complete the reset process.

6. Verify the Reset

Start the engine to confirm that the maintenance light is no longer illuminated.