how to reset the maintenance light on Honda Accord 9th Generation (2013-2017)

Honda Accord Eleventh Generation (2023-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

346 words

Problem Statement

Learn how to reset the maintenance light on Honda Accord 9th Generation (2013-2017) with this simple step-by-step guide. Quick and easy process.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park (or neutral for manual transmissions) before performing the reset.

Symptoms

•Maintenance light remains illuminated on the dashboard
•Message indicating 'Maintenance Due' or similar may appear
•Service reminder might not clear after performing maintenance

Diagnostic Steps

1
Ensure the vehicle is turned off.
2
Insert the key into the ignition and turn it to the 'ON' position without starting the engine.
3
Locate the gas pedal inside the vehicle.
4
Press the gas pedal three times within a 5-second interval.
5
Turn the ignition off and then start the engine to check if the light is cleared.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is turned off.
2
Insert the key into the ignition and turn it to the 'ON' position without starting the engine.
3
Locate the gas pedal inside the vehicle.
4
Press the gas pedal three times within a 5-second interval.
5
Turn the ignition off and then start the engine to check if the light is cleared.

Solution

1. Preparation

Gather necessary tools: none required for this reset.
Ensure the vehicle is parked safely and in a well-ventilated area.

2. Ignition Position

Insert the key into the ignition and turn it to the "ON" position without starting the engine.
Do not press the brake pedal.

3. Gas Pedal Procedure

Locate the gas pedal.
Firmly press the gas pedal three times in quick succession within 5 seconds.
Be mindful of the timing to ensure the steps are executed correctly.

4. Turn Off Ignition

After pressing the gas pedal, turn the ignition off completely.

5. Verify Reset

Start the engine to ensure the maintenance light is no longer illuminated.
If the light remains, repeat the gas pedal procedure to ensure correct timing and execution.