FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Honda Accord? - Honda Accord
Home/Cars/Honda/Accord/Eleventh Generation (2023-present)/how to reset the maintenance light on my Honda Accord?

how to reset the maintenance light on my Honda Accord?

Honda Accord Eleventh Generation (2023-present)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
392 words

Problem Statement

Learn how to reset the maintenance light on your Honda Accord after maintenance. Step-by-step instructions for a quick and easy reset.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe position and the parking brake is engaged before performing this reset.

Symptoms

  • •Maintenance light is illuminated on the dashboard
  • •No other warning lights are present
  • •Vehicle has recently undergone maintenance (oil change, filter replacement, etc.)

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required for this procedure.

Parts Required

  • •None required for this procedure.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked in a safe location.
  • Gather necessary tools, if required (e.g., a small flashlight to see the dashboard).
2. Resetting the Maintenance Light

  1. Turn on the Ignition:

    • Insert the key and turn it to the "ON" position without starting the engine.

  2. Locate the Odometer Reset Button:

    • Identify the odometer reset button on the instrument panel, usually located near the speedometer.

  3. Reset the Odometer:

    • Press and hold the odometer reset button.
    • While holding the button, observe the odometer display; it should change to "000000" or blink, indicating the reset is in progress.

  4. Release the Button:

    • After a few seconds, release the odometer reset button. The maintenance light should turn off.

  5. Turn Off the Ignition:

    • Turn the ignition key to the "OFF" position.

  6. Verify the Reset:

    • Turn the ignition back to the "ON" position to check that the maintenance light is no longer illuminated.