how to reset the maintenance light on my Honda Accord

Honda Accord Eleventh Generation (2023-present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

3 min read

423 words

Problem Statement

Learn how to reset the maintenance light on your Honda Accord with this step-by-step guide. Ensure your vehicle is ready for the road again.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' and on a level surface while performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder message displayed on the information screen
•No change in vehicle performance or functionality

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Press the 'Select/Reset' button located on the instrument panel until the maintenance message appears.
3
Hold the 'Select/Reset' button for about 10 seconds until the maintenance light begins to blink.
4
Release the button and then press it again to confirm the reset when the maintenance light is blinking.
5
Turn off the ignition and then turn it back on to ensure the maintenance light is off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•No specific tools are required for this procedure.

Parts Required

•No parts are needed for resetting the maintenance light.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Press the 'Select/Reset' button located on the instrument panel until the maintenance message appears.
3
Hold the 'Select/Reset' button for about 10 seconds until the maintenance light begins to blink.
4
Release the button and then press it again to confirm the reset when the maintenance light is blinking.
5
Turn off the ignition and then turn it back on to ensure the maintenance light is off.

Solution

1. Preparation

Ensure the vehicle is in a safe, well-ventilated area.
Gather necessary tools, such as the owner's manual for reference.

2. Ignition Position

Insert the key into the ignition and turn it to the "ON" position, ensuring not to start the engine. This powers the vehicle's electrical systems.

Locate the "Select/Reset" button on the instrument panel.
Press this button until you see the maintenance light or message appear on the dashboard.

4. Resetting the Maintenance Light

Once the maintenance message is displayed, hold the "Select/Reset" button for approximately 10 seconds.
Observe for the maintenance light to begin blinking, indicating that the reset process has initiated.

5. Confirming the Reset

Release the "Select/Reset" button and press it again while the maintenance light is blinking to confirm the reset.
The maintenance light should turn off after this confirmation.

6. Final Check

Turn the ignition off and then back on to verify that the maintenance light is no longer illuminated.