how to reset the maintenance light on my Honda Accord 9th Generation (2013-2017)

Honda Accord Eleventh Generation (2023-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

389 words

Problem Statement

Learn how to reset the maintenance light on your Honda Accord 9th Generation (2013-2017) with this step-by-step guide. Quick and easy instructions included.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' and on a flat surface to prevent unintended movement while resetting the light.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder for oil change or service due
•No other performance issues present

Diagnostic Steps

1
Turn the ignition to the 'ON' position without starting the engine.
2
Press the 'Select/Reset' button on the dashboard until the oil life indicator is displayed.
3
Press and hold the 'Select/Reset' button for about 10 seconds until the oil life resets to 100%.
4
Release the button and turn the ignition off.
5
Start the engine to verify that the maintenance light is no longer illuminated.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Flathead screwdriver (optional)

Parts Required

•None required for the reset procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition to the 'ON' position without starting the engine.
2
Press the 'Select/Reset' button on the dashboard until the oil life indicator is displayed.
3
Press and hold the 'Select/Reset' button for about 10 seconds until the oil life resets to 100%.
4
Release the button and turn the ignition off.
5
Start the engine to verify that the maintenance light is no longer illuminated.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Gather necessary tools (if needed, such as a flathead screwdriver for button access).

2. Ignition Setup

Insert the key into the ignition and turn it to the "ON" position without starting the engine.
Ensure all electronic accessories are turned off (e.g., radio, air conditioning).

3. Reset the Maintenance Light

Locate the "Select/Reset" button on the dashboard (often near the speedometer).
Press the "Select/Reset" button until the oil life indicator is displayed on the screen.
Hold the button down for approximately 10 seconds until the display shows that the oil life is resetting to 100%.

4. Finalization

Once the oil life has reset, release the button.
Turn the ignition off completely.
Start the engine to confirm that the maintenance light has been successfully reset.