how to troubleshoot brake grinding noise in Honda Accord 9th Generation (2013-2017)

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

565 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to troubleshoot and fix brake grinding noise in Honda Accord 9th Generation (2013-2017). Step-by-step guide with diagnostic and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery when working with electronic brake components.
•Allow brake components to cool before handling to avoid burns.

Symptoms

•Grinding noise during braking
•Vibration in the brake pedal
•Reduced braking performance
•Check brake wear indicator light illuminated
•Increased stopping distance
•Brake dust accumulation on wheels

Diagnostic Steps

1
Inspect brake pads for wear; measure thickness and look for uneven wear.
2
Check brake rotors for scoring, warping, or rust buildup.
3
Examine calipers for proper operation and any signs of sticking.
4
Inspect brake hardware (pins, clips, and shims) for damage or improper installation.
5
Test brake fluid level and condition; check for contamination or moisture.
6
Listen for noise while applying brakes in a stationary position to isolate the source.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Lug wrench
•Jack and jack stands
•Socket set
•Torque wrench
•Brake cleaner
•Bungee cord

Parts Required

•Brake pads
•Brake rotors
•Brake fluid

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake pads for wear; measure thickness and look for uneven wear.
2
Check brake rotors for scoring, warping, or rust buildup.
3
Examine calipers for proper operation and any signs of sticking.
4
Inspect brake hardware (pins, clips, and shims) for damage or improper installation.
5
Test brake fluid level and condition; check for contamination or moisture.
6
Listen for noise while applying brakes in a stationary position to isolate the source.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface, and set the parking brake.
Wear safety glasses and gloves.

2. Remove Wheel

Use a lug wrench to loosen the lug nuts.
Lift the vehicle using a jack and secure it with jack stands.
Remove the lug nuts and take off the wheel.

3. Inspect and Replace Brake Pads

Sub-steps:
- Remove caliper bolts using a socket wrench.
- Carefully slide the caliper off the brake rotor and support it using a bungee cord (do not let it hang by the brake line).
- Remove old brake pads from the caliper bracket.
- Measure the thickness of the new brake pads against the old ones.
- Install new brake pads in the caliper bracket.

4. Inspect and Replace Brake Rotors (if necessary)

Sub-steps:
- Check the rotor for scoring or warping with a micrometer.
- If worn, remove the caliper bracket (if applicable) and rotor retaining screws, then slide the rotor off.
- Install the new rotor onto the hub, ensuring it is seated properly.
- Reattach the caliper bracket and torque bolts to manufacturer specifications (usually around 25-35 ft-lbs).

5. Reassemble Components

Sub-steps:
- Reinstall the caliper over the new brake pads and rotor.
- Tighten caliper bolts to manufacturer specifications (typically around 20-25 ft-lbs).
- Reattach the wheel, hand-tightening the lug nuts.

6. Lower Vehicle and Final Checks

Lower the vehicle and remove jack stands.
Torque the lug nuts to manufacturer specifications (typically around 80-100 ft-lbs in a star pattern).
Pump the brake pedal several times to ensure proper pad seating.