how to troubleshoot Honda Accord 9th Generation (2013-2017) cruise control not working

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

576 words

Problem Statement

Learn how to troubleshoot and fix cruise control issues in Honda Accord 9th Generation (2013-2017). Step-by-step guide with diagnostic steps and solutions.

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components to avoid short circuits.
•Allow the engine to cool before working on any components near it.

Symptoms

•Cruise control light on the dashboard not illuminating
•Inability to set or maintain cruising speed
•Intermittent activation of the cruise control system
•Engine speed fluctuates without driver input
•Warning lights illuminated (e.g., brake system light)

Diagnostic Steps

1
Check for any error codes using an OBD-II scanner.
2
Inspect the cruise control switch for physical damage or wear.
3
Test the brake switch to ensure it’s functioning correctly.
4
Verify the operation of the accelerator pedal position sensor.
5
Check the vehicle speed sensor for proper output.
6
Examine the fuse related to the cruise control system.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Screwdriver set

Parts Required

•Cruise control switch (if faulty)
•Brake switch (if faulty)
•Accelerator pedal position sensor (if faulty)
•Vehicle speed sensor (if faulty)
•Cruise control fuse (if blown)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check for any error codes using an OBD-II scanner.
2
Inspect the cruise control switch for physical damage or wear.
3
Test the brake switch to ensure it’s functioning correctly.
4
Verify the operation of the accelerator pedal position sensor.
5
Check the vehicle speed sensor for proper output.
6
Examine the fuse related to the cruise control system.

Solution

1. Preparation

Gather all necessary tools and parts.
Disconnect the negative terminal of the battery to ensure safety.

2. Inspect the Cruise Control Switch

Locate the cruise control switch on the steering wheel.
Remove the steering wheel cover (if necessary) using a socket set.
Check for any loose or damaged connections in the switch harness.
If damaged, replace the cruise control switch.

3. Test the Brake Switch

Locate the brake switch, usually mounted above the brake pedal.
Disconnect the wiring harness from the switch.
Use a multimeter to check for continuity when the brake pedal is pressed.
If no continuity is detected, replace the brake switch.

4. Verify Accelerator Pedal Position Sensor

Disconnect the wiring harness from the accelerator pedal position sensor.
Using a multimeter, check the sensor's resistance and output voltage while pressing the pedal.
If the readings are outside the manufacturer’s specifications, replace the sensor.

5. Check Vehicle Speed Sensor

Locate the vehicle speed sensor, typically on the transmission.
Disconnect the sensor and inspect the wiring for damage.
Using a multimeter, measure the output voltage while driving.
If the sensor is faulty, replace it with a new one.

6. Inspect and Replace Fuse

Locate the fuse box, usually found under the dashboard or hood.
Identify the cruise control fuse using the diagram on the fuse box cover.
Check the fuse for continuity; if blown, replace it with a fuse of the same amperage.