how to troubleshoot Honda Accord 9th Generation (2013-2017) transmission slipping

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

538 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to troubleshoot and fix transmission slipping in Honda Accord 9th Generation (2013-2017). Step-by-step guide with symptoms, diagnostics, and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the transmission fluid pan.

Symptoms

•Check engine light illuminated
•Engine revs without corresponding acceleration
•Harsh or delayed shifting between gears
•Unusual noises during gear changes
•Burning smell from the transmission area
•Transmission fluid leaks under the vehicle

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related fault codes.
2
Check the transmission fluid level and condition; look for discoloration or burnt smell.
3
Inspect the transmission fluid lines and pan for any signs of leaks.
4
Test the vehicle's throttle position sensor (TPS) for proper operation.
5
Verify the operation of the transmission control module (TCM) and its connections.
6
Perform a visual inspection of the transmission mounts for wear or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Transmission fluid pump
•Screwdriver set
•Fluid catch pan

Parts Required

•Honda ATF DW-1 transmission fluid
•Transmission filter (if applicable)
•Gasket for transmission pan (if applicable)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related fault codes.
2
Check the transmission fluid level and condition; look for discoloration or burnt smell.
3
Inspect the transmission fluid lines and pan for any signs of leaks.
4
Test the vehicle's throttle position sensor (TPS) for proper operation.
5
Verify the operation of the transmission control module (TCM) and its connections.
6
Perform a visual inspection of the transmission mounts for wear or damage.

Solution

1. Preparation

Gather tools and parts needed for the repair.
Ensure the vehicle is parked on a level surface, and the engine is off.
Disconnect the battery to prevent electrical shorts.

2. Check and Replace Transmission Fluid

Sub-steps:
1. Remove the transmission fluid dipstick and check the fluid level.
2. If the fluid is low, add the recommended fluid type (Honda ATF DW-1).
3. If the fluid is burnt or contaminated, drain the old fluid by loosening the transmission pan bolts.
4. Replace the transmission filter if applicable.
5. Refill with the correct type and amount of new transmission fluid.

3. Inspect and Clean the Transmission Control Module (TCM)

Sub-steps:
1. Locate the TCM, usually found near the transmission or under the dashboard.
2. Disconnect the electrical connector from the TCM.
3. Inspect for corrosion or damaged pins; clean or repair as necessary.
4. Reconnect the TCM and ensure the connection is secure.

4. Test Drive and Adjust

Sub-steps:
1. Reconnect the battery and start the vehicle.
2. Check the transmission fluid level again after running the engine.
3. Take the vehicle for a test drive to monitor for any slipping or abnormal shifting.
4. If slipping persists, consider reprogramming the TCM or further diagnosis of internal transmission components.