how to troubleshoot my Honda Accord 9th Generation (2013-2017) that won't go into gear

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

554 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to troubleshoot and fix transmission issues in Honda Accord 2013-2017. Step-by-step guide with diagnostic steps and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before handling any components.

Symptoms

•Check engine light illuminated
•Engine revs but vehicle does not move
•Transmission fluid leaks under the vehicle
•Difficulty shifting gears
•Grinding noise during attempted gear engagement

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related codes.
2
Check the transmission fluid level and condition (look for discoloration or burnt smell).
3
Inspect the transmission linkage for any visible damage or disconnection.
4
Test the brake switch operation, ensuring it engages correctly when the brake pedal is pressed.
5
Examine the transmission solenoids for proper operation using a multimeter.
6
Check for any blown fuses related to the transmission control module.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Funnel
•Socket set
•Screwdriver
•Multimeter
•Torque wrench

Parts Required

•Transmission fluid (specific to Honda Accord)
•Brake switch (if faulty)
•Transmission control module (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related codes.
2
Check the transmission fluid level and condition (look for discoloration or burnt smell).
3
Inspect the transmission linkage for any visible damage or disconnection.
4
Test the brake switch operation, ensuring it engages correctly when the brake pedal is pressed.
5
Examine the transmission solenoids for proper operation using a multimeter.
6
Check for any blown fuses related to the transmission control module.

Solution

1. Preparation

Gather the necessary tools and parts.
Ensure the vehicle is parked on a flat surface and the engine is turned off.
Disconnect the negative battery terminal for safety.

2. Check and Replace Transmission Fluid

Tools Required: Funnel, Transmission fluid (specific to Honda Accord), Rags.
Sub-steps:
1. Remove the transmission dipstick and wipe it clean.
2. Insert the dipstick back and remove it again to check the fluid level.
3. If low, add the recommended type of transmission fluid through the dipstick tube until it reaches the appropriate level.
4. Inspect for leaks around the transmission pan and replace any worn seals or gaskets if necessary.

3. Inspect Transmission Linkage

Tools Required: Socket set, Screwdriver.
Sub-steps:
1. Locate the transmission linkage under the vehicle.
2. Check for any loose or disconnected components.
3. Tighten any loose bolts and reconnect any dislodged linkages.
4. If components are damaged, replace them with OEM parts.

4. Test Brake Switch

Tools Required: Multimeter.
Sub-steps:
1. Locate the brake switch near the brake pedal.
2. Using a multimeter, test for continuity when the brake pedal is pressed.
3. If there is no continuity, replace the brake switch.
4. Reconnect the battery and test the system.

5. Inspect and Replace Transmission Control Module (if necessary)

Tools Required: Socket set, Torque wrench.
Sub-steps:
1. Disconnect the battery again.
2. Remove the transmission control module from its housing.
3. Inspect wiring and connectors for damage.
4. If the module is faulty, install a new one and torque bolts to manufacturer specifications.