my Honda Accord 9th Generation (2013-2017) engine makes a knocking noise what’s wrong

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

536 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix engine knocking noise in Honda Accord 9th Generation (2013-2017). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems
•Allow engine to cool before opening the oil drain plug or working on engine components

Symptoms

•Knocking or tapping noise from the engine, particularly at idle or acceleration
•Loss of engine power or performance
•Engine misfires or rough idle
•Increased oil consumption
•Check engine light illuminated

Diagnostic Steps

1
Scan for error codes using OBD-II scanner
2
Inspect engine oil level and condition
3
Listen to engine sounds with a mechanic's stethoscope
4
Check engine mounts for wear or damage
5
Inspect timing chain or belt for wear, slack, or misalignment
6
Perform a compression test on engine cylinders

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Mechanic's stethoscope
•Oil filter wrench

Parts Required

•Engine oil (5W-20)
•Oil filter
•Timing chain/belt (if required)
•Engine mounts (if required)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather tools and parts needed.
Disconnect the battery to prevent electrical shorts.
Ensure the vehicle is parked on a flat surface, and engage the parking brake.

2. Change Engine Oil and Filter

Sub-steps:
1. Remove the drain plug using a socket set and let the old oil drain completely.
2. Replace the oil filter with a new one, ensuring the old filter’s rubber O-ring is removed.
3. Reinstall the drain plug and torque to manufacturer specifications (approximately 30 ft-lbs).
4. Fill the engine with the appropriate type and amount of new oil (5W-20 or as specified).

3. Inspect and Replace Timing Chain/Belt (if necessary)

Sub-steps:
1. Remove any components obstructing access to the timing chain/belt (e.g., front cover, pulleys).
2. Check for wear or slack in the timing chain/belt. If damaged, remove and replace with a new one.
3. Use a torque wrench to secure all bolts to manufacturer specifications during reassembly.

4. Inspect Engine Mounts

Sub-steps:
1. Visually inspect engine mounts for cracks or wear.
2. Use a wrench to loosen and remove bolts securing the mounts.
3. Replace with new engine mounts and torque to manufacturer specifications.