my Honda Accord 9th Generation (2013-2017) shakes when I brake what should I check

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

574 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking in Honda Accord 9th Generation (2013-2017). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always secure the vehicle with jack stands before working underneath.
•Wear safety glasses and gloves to protect against brake dust and debris.

Symptoms

•Steering wheel shakes during braking
•Vibration felt in the brake pedal
•Increased stopping distance
•Noise from the brake system (squealing or grinding)
•Uneven wear on brake pads or rotors

Diagnostic Steps

1
Inspect brake rotors for warping or uneven surfaces using a dial indicator.
2
Check brake pads for wear and ensure they are properly seated.
3
Examine the brake calipers for proper operation and any sticking issues.
4
Inspect suspension components, including control arms and ball joints, for wear or damage.
5
Check tire balance and alignment to ensure they are within specifications.
6
Test brake lines for leaks or damage that could affect braking performance.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Micrometer
•Jack and jack stands
•Brake cleaner
•Bungee cord

Parts Required

•Brake rotors
•Brake pads
•Caliper hardware (if worn)
•Suspension components (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake rotors for warping or uneven surfaces using a dial indicator.
2
Check brake pads for wear and ensure they are properly seated.
3
Examine the brake calipers for proper operation and any sticking issues.
4
Inspect suspension components, including control arms and ball joints, for wear or damage.
5
Check tire balance and alignment to ensure they are within specifications.
6
Test brake lines for leaks or damage that could affect braking performance.

Solution

1. Preparation

Gather tools and parts needed for the repair.
Ensure the vehicle is parked on a flat surface, and engage the parking brake.
Disconnect the battery if working on electronic brake components.

2. Inspect and Replace Brake Rotors

Lift Vehicle: Use a jack to raise the vehicle and secure it with jack stands.
Remove Wheel: Use a socket set to remove lug nuts and take off the wheel.
Check Rotor: Measure the rotor thickness with a micrometer. If below minimum specifications or warped, proceed to replace.
Remove Caliper: Unbolt the caliper from the bracket and support it with a bungee cord or suitable device.
Remove Rotor: Unscrew the rotor retaining screws (if applicable) and remove the rotor from the hub.
Install New Rotor: Place the new rotor onto the hub and secure it with screws.
Reattach Caliper: Reinstall the caliper over the new rotor and tighten bolts to manufacturer's torque specifications (typically 25-35 lb-ft).

3. Inspect and Replace Brake Pads

Remove Old Pads: Remove the caliper bracket if necessary; take out the old brake pads.
Install New Pads: Apply brake grease to the back of the new pads and install them into the caliper bracket.
Reassemble: Reattach the caliper bracket and ensure all bolts are torqued properly.

4. Suspension Check

Inspect Components: Visually check control arms, bushings, and ball joints for wear.
Replace Worn Parts: If any components are damaged, replace them as necessary following manufacturer specifications.

5. Tire Balance and Alignment

Check Balance: Have tires balanced at a professional shop.
Perform Alignment: If needed, perform a wheel alignment to ensure proper tire wear and handling.